Skip to content

Shop the Sirona Spa Care line

32 products for sale today

Showing everything. Choose your tub’s system to see only what it can take.

Sanitize

Balance

Clear the water

Stain & scale

Clean the tub

Test & start up

More from Sirona

Inside the Simplified Pools store in Northlake, Texas

Not sure what your water needs? Bring us a sample and the tub's gallons. Free testing in Northlake, and you leave with a plan made for a hot tub — not a guess.

Get it tested free

Which system is your tub on?

Everything else follows from this. Adding the right product to the wrong system is the most common reason a tub will not clear up.

Bromine

3–5 ppm

Most hot tubs, and the default we recommend. Bromine keeps working at spa temperature where chlorine gasses off, and it has almost no smell.

The trade-off ▸

It needs a bromide bank built before it will hold at all — which is why a tub that was "just refilled" often reads zero no matter how many tabs are in the floater.

Start hereSirona Spa Care Bromine Start-up Kit

Chlorine

2–4 ppm

Owners who already understand chlorine from a pool and are happy to dose by hand.

The trade-off ▸

It burns off fast in hot water, so it is a more hands-on routine — and dichlor raises stabilizer every time you use it, which eventually stops the tub holding sanitizer at all.

Start hereSirona Spa Care Chlorine Start-up Kit

Simply (no chlorine, no bromine)

Sanitizer 30–50 ppm

People with sensitive skin, or anyone who would rather not use chlorine or bromine. Three liquids on a weekly rhythm, and the water has almost no smell.

The trade-off ▸

It does not mix with the other two systems at all. No chlorine, no bromine, no chlorine-based shock and no mineral cartridge goes in a Simply tub — a tub cannot be run half on one and half on the other — and it needs its own test strips.

Start hereSirona® Simply Waterline Control

Something's wrong with my water

Tap what you are seeing. Each one says what is really happening first — the obvious fix is often the wrong one.

My hot tub is foaming

Foam is body oil, detergent and lotion whipped up by the jets — most often from swimsuits washed in ordinary detergent — and soft water makes it worse. It is a soap and soft-water problem, not a sign the sanitizer is low.

  1. 1Knock the foam down so you can use the tub tonight
  2. 2Shock the water: the defoamer clears the surface, the shock removes the oils
  3. 3Test calcium hardness — soft water foams on its own
  4. 4Soak the filter — the oils are in the pleats
  5. 5Rinse swimsuits in plain water, never detergent
  6. 6If it comes back within days, the water is due a change
Sirona® Foam Out$32.99
The water is cloudy

Particles too small for the filter to catch, usually oils and dead sanitizer by-product. Cloudy water is a filter-and-shock problem far more often than a sanitizer-level problem.

  1. 1Check pH and alkalinity first — water out of balance clouds on its own
  2. 2Soak the filter
  3. 3Shock it and run the jets with the cover off
  4. 4Clump the haze so the filter can take it out
Bromine or chlorine tubSirona® Activate Granular$32.99
It smells like chemicals

That smell is spent sanitizer bound to sweat and oils, not too much sanitizer. The instinct is to add less; the fix is to shock it so the spent compounds burn off.

  1. 1Shock the water
  2. 2Keep the cover off afterwards so it can gas off
  3. 3Soak the filter
Bromine or chlorine tubSirona® Activate Granular$32.99
It will not hold bromine or chlorine

On a bromine tub this is nearly always an empty bromide bank — tabs alone cannot build one, so the reading stays at zero however many you add. On a chlorine tub it is usually stabilizer built up from dichlor.

  1. 1On bromine: build the bank first, then let the tabs maintain it
  2. 2Shock to activate what is there
  3. 3On chlorine, if it has been months of dichlor, the answer is a drain and refill — stabilizer does not come out any other way
Bromine tubSirona Spa Care Sodium Bromide$29.99
There is scale or a rough crust on the jets

Calcium coming out of solution onto the hottest surfaces. Hot water does this far more readily than pool water, which is why the spa calcium target sits well below a pool's.

  1. 1Bring pH and alkalinity back down
  2. 2Hold the hardness where it belongs rather than letting it climb
  3. 3Keep it in solution so it stops depositing
Sirona® Defend$31.99
The water makes my skin itch

Usually pH drifting out of band rather than the sanitizer. Water outside its range stops matching your skin and starts stripping it.

  1. 1Test and correct pH first
  2. 2Hold it steady rather than correcting it every week
  3. 3If pH is fine, shock — spent sanitizer irritates skin too
Bromine or chlorine tubSirona® pH Balance +$64.99
The shell is staining, or the water went brown after a refill

Metals in the fill water — common on a well, and it shows the moment you add sanitizer because that is what oxidises them.

  1. 1Treat the fill water BEFORE you sanitize it
  2. 2Hold the metals in solution so they cannot deposit
  3. 3Bring the shell back once the water is right
Bromine or chlorine tubSirona® Prevent$14.99

The whole routine, in five jobs

That is genuinely all of it. Anything else on the shelf is for a specific problem, not for every week.

each useTest the sanitizer before you get in

A tub at 102 °F with no sanitizer grows bacteria faster than anything else in your garden. It is a ten-second strip.

weeklyShock the water

Sweat, skin and lotion are what actually make a tub smell and go cloudy — not the sanitizer. Shock burns them off. A spa that smells strong is usually under-shocked, not over-chlorinated. Activate is the shock for a chlorine or bromine tub; Simply Oxidizer is the shock for a Simply tub. They are not interchangeable.

weeklyCheck pH and alkalinity, and correct in that order

Sanitizer stops working properly as pH climbs, so a tub with perfect bromine and high pH still feels slimy. Jets aerate constantly, which pushes pH up every week.

monthlySoak the filter cartridge overnight

A rinsed filter looks clean and is not. Oils bind into the pleats and only a soak removes them — this is the single most skipped job and the most common cause of cloudy water.

at least every 3 monthsPurge the pipes, then drain and refill

Biofilm grows inside plumbing you cannot see or reach. Draining without purging first leaves it there to seed the new water within days.

The weekly routine, step by step, for each system

The numbers to hold

Calcium sits lower than a pool's (hot water drops it onto your heater) and sanitizer sits higher (heat burns it off in hours).

Bromine3–5 ppm
Free chlorine2–4 ppm
pH7.4–7.6
Total alkalinity80–120 ppm
Calcium hardness150–250 ppm

Residential targets. Legal limits for a public spa in Texas are wider (free chlorine 2.0–8.0 ppm, bromine 3–10 ppm, pH 7.0–7.8) under 25 TAC Chapter 265, Subchapter L.

What a low or high reading means

When is it due a drain?

Gallons ÷ (3 × bathers per day), and never longer than the three months Sirona gives. A tub whose filter has never been soaked comes due sooner.

Tub1/day2/day4/day
300 gal90d*50d25d
400 gal90d*67d33d
500 gal90d*83d42d

* Sirona's own limit.

Purge the pipes before you drain — what is left in the plumbing goes straight into the fresh water. Sirona® Jet Blaster

How to drain and refill, in order

Questions we get asked

What chemicals do I need for a hot tub?

A sanitizer (bromine, chlorine, or the chlorine- and bromine-free Simply system), a shock to burn off body oils weekly, something to move pH and alkalinity, and test strips. That is the whole list. Scale, stain, foam and clarity products are there for when a specific thing goes wrong — they are not part of the weekly routine.

Is bromine or chlorine better for a hot tub?

Bromine for most tubs. It keeps working at spa temperature where chlorine gasses off, and it has far less smell. Chlorine is familiar if you run a pool, but it burns off fast in hot water and dichlor builds up stabilizer until the tub stops holding sanitizer at all.

Why does my hot tub foam?

Foam is body oil, lotion and detergent whipped up by the jets — most often from swimsuits washed in ordinary detergent — and soft water makes it worse. Knock it down, shock the water, check calcium hardness, soak the filter, and rinse suits in plain water.

Why will my spa not hold bromine?

Almost always an empty bromide bank. Tablets alone cannot build one, so the reading stays near zero however many you put in the floater. Build the bank first, shock to activate it, and the tablets will then maintain it.

How often should I drain my hot tub?

At least every three months — that is Sirona’s own recommendation — and sooner when the tub is used heavily. The rule of thumb is gallons divided by three times the number of bathers per day: a 450-gallon tub used by 2 people a day comes due about every 75 days. Purge the plumbing before you drain.

Do you carry the full Sirona Spa Care line?

32 Sirona products are for sale here today, from the bromine and chlorine start-up kits through sanitizers, balancers, clarifiers, filter cleaners and stain and scale control.

Can you test my spa water?

Bring a sample and the tub’s gallons to the Northlake store and we will test it free and print a plan made for a hot tub: what to add, in order, with each amount taken from the product’s own label.

Free checklist

The DFW month-by-month pool checklist

What it covers (12 months · 76 tasks · 12 marked critical):

  • Freeze nights (January and December): keep the pump running, and what to drain if the power goes out
  • The March opening: test everything, brush, shock, then balance alkalinity, pH and calcium
  • Summer: testing two or three times a week, the weekly shock, and what to do after rain or a party
  • Fall leaves, and easing the chemistry down for winter
Read it now — no email needed →

Email me the checklist

One email with a link to the printable checklist — print it, or save it as a PDF, from that page. That is all we send: no mailing list.

Retail Store

Visit Us Today

Stop by for free water testing, expert advice, and professional-grade supplies.

Simplified Pools

1611 Commons Cir Suite 100
Northlake, TX 76226

Get Directions →
Call Now
Book Service