Drain and refill a hot tub
How often to drain and refill a hot tub, and how to do it
Sirona recommends draining a hot tub at least every three months, and sooner if it is used a lot. Purge the plumbing before you drain, soak the filter while the tub is empty, and start the fresh water up as a new fill.
From Sirona’s own directions and labels, checked on 2026-11-15. Where each part comes from
What you need
The products this guide uses
Sirona® Jet BlasterPurges the biofilm out of the plumbing before a drain$15.99Shop
Sirona® Filter CleanerThe overnight soak that actually restores a cartridge$29.99Shop
Sirona® Quick GlossBrings the shell and cabinet back up$31.99Shop
Bromine or chlorine tubSirona® Spa MineralsA silver mineral cartridge for the filter, used alongside bromine or chlorine — not with the Simply system$57.99Shop How often
The rule of thumb is the tub’s gallons divided by three times the number of people who use it each day — and never longer than the three months Sirona gives. A tub that foams, smells or will not clear between changes is due sooner.
| Tub | 1 a day | 2 a day | 4 a day |
|---|---|---|---|
| 300 gallons | 90 days* | 50 days | 25 days |
| 400 gallons | 90 days* | 67 days | 33 days |
| 500 gallons | 90 days* | 83 days | 42 days |
People using the tub each day, across the top. * Sirona’s own limit: at least every three months, whatever the arithmetic says.
How to do it
Take the filter out
The filter is cleaned on its own; the purge is not run through it.
Purge the plumbing
Pour the purge into the old water and run the jets, and the blower if there is one, for 15 minutes. What it loosens from the pipes leaves with the water.
Drain the tub completely
All of it. Old water left in the bottom carries on into the new fill.
Soak the filter while the tub is empty
Soak the cartridge for at least 3 hours, overnight if it is heavily soiled, and rinse it thoroughly before it goes back.
Wipe the shell and protect it
The shell polish goes on a dry surface, so this is the moment for it: before the water goes back in.
Refill and start up
A fresh fill is a new tub: the metal treatment, the balance, then your system’s own start-up, in that order. On a bromine tub the bromide reserve is built again at every fill, and a mineral cartridge is replaced at every refill or every 4 months.
What not to do
- Do not drain without purging first: the oils, dirt and minerals in the plumbing stay behind for the new water.
- Never add chemicals to the water when people are in the spa.
- NEVER mix chlorine and acid (or any two chemicals) together — toxic chlorine gas. Add each chemical to the water separately, circulating between additions
- Never heat the tub above 104°F.
Free water testing at the store
Bring a sample. Leave with a plan for your tub.
A test strip is a rough read. At the counter we test the water and print a plan made for a hot tub, not a pool: each reading against its target, and what to add in the order to add it.
- Sized to your tub’s gallons, so bring the number with the sample.
- Every amount is taken from the product’s own label. A product whose label rate we have not read is named without an amount, never guessed.
- For bromine, chlorine or Simply. A Simply tub is never told to add chlorine or bromine.
Where
Simplified Pools
1611 Commons Cir Suite 100, Northlake, TX 76226
- Monday – Friday10am – 6pm
- Saturday10am – 3pm
- SundayClosed
No appointment is needed for a water test.
Questions people ask next
How often should I drain my hot tub?
At least every three months, which is Sirona’s own recommendation, and sooner when it is used heavily. The rule of thumb is the gallons divided by three times the daily bathers.
Do I really need to purge the pipes before draining?
Yes. The plumbing holds oils, dirt and minerals that draining alone leaves behind, and Sirona’s directions use the purge at every drain and refill.
Can I just top the water up instead of draining?
Topping up replaces what evaporated, not what has built up. Dissolved material leaves only when the water does, which is why calcium that is too high, or water that will not stop foaming, ends in a change of water.
What do I add first after refilling a hot tub?
The metal treatment while it fills, then alkalinity, pH and calcium, then your system’s start-up products in the label’s order. The start-up guide has that order for bromine, chlorine and Simply.
- Hot tub start-upHow to start up a new or refilled hot tubNew tub or fresh water: what goes in first, and the order for bromine, chlorine and Simply.
- Hot tub maintenanceWeekly hot tub care: the routine that keeps the water clearBefore every soak, once a week, once a month: the whole routine, system by system.
- Change sanitizer systemSwitching hot tub sanitizers: chlorine, bromine and SimplyWhy a change of sanitizer is made on fresh water, and the steps to make it.
Where this comes from
Every step and every rate on this page is Sirona’s own, read on 2026-11-15. Always read the label on the bottle in your hand: it is the one that counts.