Skip to content

Hot tub maintenance

Weekly hot tub care: the routine that keeps the water clear

Once a week, test and balance the water and shock it; a chlorine or bromine tub also gets a scale treatment and an enzyme, and a Simply tub its two weekly liquids. Test the sanitizer before every soak, and clean the filter once a month.

From Sirona’s own directions and labels, checked on 2026-11-15. Where each part comes from

Before and after a soak

Keep the water circulating and filtering for at least 8 hours every day; everything below depends on it.

Once a week — a chlorine or bromine tub

Sirona’s own weekly program, in its order. Do it on the same day each week.

  1. Add the scale treatment, then the enzyme

    The scale treatment keeps calcium in solution so it does not land on the heater. The enzyme breaks down body oil and lotion before they cloud the water or clog the filter. Add one, wait 15 minutes with the jets on, then add the other.

  2. Shock the water

    Jets running, cover off for 15 minutes. This is what removes the sweat and oils that make a tub smell.

Open this if it is the system your tub runs on.

Simply tubs only

Once a week — a Simply tub

Two products go in every week; the sanitizer only when its own strip says so.

  1. Test with Simply strips

    Read the Simply sanitizer, pH, total alkalinity and calcium hardness.

  2. Add Waterline Control

    The weekly dose keeps deposits off the waterline.

  3. Add Simply Oxidizer

    The weekly oxidizer does the job a shock does on a chlorine or bromine tub. Sirona’s chart uses the higher amount for a tub that is used three or more times a week.

  4. Add Simply Sanitizer only if the strip says so

    The label holds the sanitizer at 50 ppm and never lets it fall under 30. Add it only when the strip reads low.

Once a month, and every few months

What not to do

  • Never add chemicals to the water when people are in the spa.
  • NEVER mix chlorine and acid (or any two chemicals) together — toxic chlorine gas. Add each chemical to the water separately, circulating between additions
  • Never add chlorine, bromine, a chlorine-based shock or a mineral cartridge to a Simply tub: Sirona says the Simply products are compatible only with the Simply system.
  • Do not use a pool’s non-chlorine shock in a hot tub: Sirona says it is not buffered for spa water.

Free water testing at the store

Bring a sample. Leave with a plan for your tub.

A test strip is a rough read. At the counter we test the water and print a plan made for a hot tub, not a pool: each reading against its target, and what to add in the order to add it.

  • Sized to your tub’s gallons, so bring the number with the sample.
  • Every amount is taken from the product’s own label. A product whose label rate we have not read is named without an amount, never guessed.
  • For bromine, chlorine or Simply. A Simply tub is never told to add chlorine or bromine.

Where

Simplified Pools

1611 Commons Cir Suite 100, Northlake, TX 76226

(469) 455-1054

  • Monday – Friday10am – 6pm
  • Saturday10am – 3pm
  • SundayClosed

No appointment is needed for a water test.

Questions people ask next

How often should I shock a hot tub?

At least once a week, and after heavy use. Sirona’s own guide says preferably after each use and no less than once a week.

How often should I test hot tub water?

The sanitizer before every soak, and a full strip 2 to 3 times a week. Test more often when the tub is used more than three times a week.

Do I need to run the hot tub pump every day?

Yes. Sirona’s guide has the water circulating and filtering for at least 8 hours every day.

Is the weekly routine different for a Simply tub?

Yes. A Simply tub gets Waterline Control and Simply Oxidizer every week, and Simply Sanitizer only when its own test strip shows the level has dropped. It never gets a chlorine or bromine product.

Where this comes from

Every step and every rate on this page is Sirona’s own, read on 2026-11-15. Always read the label on the bottle in your hand: it is the one that counts.

Free checklist

The DFW month-by-month pool checklist

What it covers (12 months · 76 tasks · 12 marked critical):

  • Freeze nights (January and December): keep the pump running, and what to drain if the power goes out
  • The March opening: test everything, brush, shock, then balance alkalinity, pH and calcium
  • Summer: testing two or three times a week, the weekly shock, and what to do after rain or a party
  • Fall leaves, and easing the chemistry down for winter
Read it now — no email needed →

Email me the checklist

One email with a link to the printable checklist — print it, or save it as a PDF, from that page. That is all we send: no mailing list.

Retail Store

Visit Us Today

Stop by for free water testing, expert advice, and professional-grade supplies.

Simplified Pools

1611 Commons Cir Suite 100
Northlake, TX 76226

Get Directions →
Call Now
Book Service