Bromine(Bromine tub)
Target 3–5 ppm
Below it
Not enough sanitizer to keep the water safe. Do not get in until it is back in range.
Above it
Take the floater out, leave the cover off and let it come down.
Hot tub water testing
Dip a test strip wrist-deep, shake it once and read it against the chart on the bottle: sanitizer, pH, total alkalinity and calcium hardness. Fix alkalinity before pH, and do not get in while the sanitizer is under its range or over the label’s limit.
From Sirona’s own directions and labels, checked on 2026-11-15. Where each part comes from
What you need
A chlorine or bromine tub is read on a chlorine and bromine strip. A Simply tub is read on Simply test strips, which read the Simply sanitizer; the other strip cannot.
Dip the strip wrist-deep for 2 seconds, take it out and shake it once, and compare the pads with the chart on the bottle. A Simply strip is read after 10 seconds.
The sanitizer before every soak, and a full strip 2 to 3 times a week. A tub used more than three times a week needs testing more often than that.
The target is where the water belongs. Under each one: what a reading below or above it means, and what answers it.
Target 3–5 ppm
Below it
Not enough sanitizer to keep the water safe. Do not get in until it is back in range.
Above it
Take the floater out, leave the cover off and let it come down.
Target 2–4 ppm
Below it
Not enough sanitizer to keep the water safe. Do not get in until it is back in range.
Above it
Add none today and let it come down with the cover off.
Target 7.4–7.6
Below it
Acidic water: hard on the heater and on skin.
Above it
The sanitizer works less well, and scale starts to form.
Target 80–120 ppm
Below it
pH will not hold still until this is up.
Target 150–250 ppm
Below it
Soft water: it foams, and it eats at the heater.
Above it
Scale on the heater and the jets. Nothing takes calcium out but replacing some of the water.
Label holds 30–50 ppm
Read on Simply test strips only. Under the lower number, add Simply Sanitizer by its label; at the higher number or above it, add none.
A strip is a rough read. The store’s test gives exact numbers, and a plan sized for your tub.
A clean cup of water from the tub, and how many gallons it holds. The plan is sized to the gallons, so a guess makes every amount a guess.
Bromine, chlorine or Simply. The store’s meter does not read the Simply sanitizer, so bring your Simply strip reading for that one.
Each reading against its target, and what to add in the order to add it, with the amount for your tub taken from each product’s own label. A product whose label rate we have not read is named without an amount rather than guessed.
Simplified Pools, 1611 Commons Cir Suite 100, Northlake, TX 76226. No appointment is needed. How the free water test works
Bromine 3–5 ppm or free chlorine 2–4 ppm, pH 7.4–7.6, total alkalinity 80–120 ppm and calcium hardness 150–250 ppm. A Simply tub holds its own sanitizer at 30–50 ppm instead of chlorine or bromine.
When both are low, alkalinity: it is what holds pH still, and the product that raises it raises pH as well. When one is low and the other high, Sirona says to fix the low one first.
Hot water drops calcium out of solution onto the hottest surface it can find, which is the heater. So a hot tub’s target sits below a pool’s.
Yes. Bring a sample and the tub’s gallons, and you leave with a printed plan for your tub.
Every step and every rate on this page is Sirona’s own, read on 2026-11-15. Always read the label on the bottle in your hand: it is the one that counts.
Free checklist
What it covers (12 months · 76 tasks · 12 marked critical):
One email with a link to the printable checklist — print it, or save it as a PDF, from that page. That is all we send: no mailing list.
Stop by for free water testing, expert advice, and professional-grade supplies.