Skip to content

Change sanitizer system

Switching hot tub sanitizers: chlorine, bromine and Simply

Change system at a drain and refill, not part-way through a fill. Purge the plumbing, drain, soak the filter, refill, and start the tub up as a new fill on the new system.

From Sirona’s own directions and labels, checked on 2026-11-15. Where each part comes from

Why it has to be fresh water

  • Bromine stays bromine

    Sirona describes the bromide reserve as turning into working bromine whenever a shock or oxidizer is added. Water that has had bromide in it keeps making bromine, so the way from bromine to chlorine is new water.

  • Simply does not share water

    Sirona says the Simply products are compatible only with the Simply system and are not to be mixed with chlorine or bromine products. Going to Simply, or leaving it, is done on a fresh fill.

The switch, step by step

  1. Purge the plumbing

    Take the filter out, pour the purge into the old water and run the jets for 15 minutes.

  2. Drain the tub completely

    Nothing of the old water should be left to mix with the new system.

  3. Soak the filter

    Soak the cartridge for at least 3 hours and rinse it thoroughly.

  4. Take out what belonged to the old system

    The floater and its tablets, and the mineral cartridge if the tub is going to Simply.

  5. Refill and start up on the new system

    Follow the start-up for the system you are moving to, from the metal treatment onward.

    How to start up a new or refilled hot tub

  6. Change your test strips

    A chlorine and bromine strip reads chlorine or bromine; a Simply strip reads the Simply sanitizer. The strip has to match the new system.

What not to do

  • Do not change system part-way through a fill. The change is made on fresh water.
  • Never add chlorine, bromine, a chlorine-based shock or a mineral cartridge to a Simply tub: Sirona says the Simply products are compatible only with the Simply system.
  • NEVER mix chlorine and acid (or any two chemicals) together — toxic chlorine gas. Add each chemical to the water separately, circulating between additions
  • Never add chemicals to the water when people are in the spa.

Free water testing at the store

Bring a sample. Leave with a plan for your tub.

A test strip is a rough read. At the counter we test the water and print a plan made for a hot tub, not a pool: each reading against its target, and what to add in the order to add it.

  • Sized to your tub’s gallons, so bring the number with the sample.
  • Every amount is taken from the product’s own label. A product whose label rate we have not read is named without an amount, never guessed.
  • For bromine, chlorine or Simply. A Simply tub is never told to add chlorine or bromine.

Where

Simplified Pools

1611 Commons Cir Suite 100, Northlake, TX 76226

(469) 455-1054

  • Monday – Friday10am – 6pm
  • Saturday10am – 3pm
  • SundayClosed

No appointment is needed for a water test.

Questions people ask next

Can I switch from bromine to chlorine without draining?

No. The bromide left in the water turns back into bromine whenever an oxidizer is added, so the tub stays a bromine tub until the water is changed.

Can I switch from chlorine to bromine without draining?

Sirona’s directions build the bromide reserve at start-up, on a fresh fill, and that is the way we recommend. Sirona does say sodium bromide can be used alongside chlorine products, but a tub is only fully on bromine from a fresh start.

How do I switch a hot tub to Sirona Simply?

On a fresh fill: purge the plumbing, drain, soak the filter, take out any mineral cartridge, refill, and follow the Simply start-up — Waterline Control, then Simply Oxidizer, then Simply Sanitizer.

Do I need new test strips when I switch?

Yes, if Simply is involved. Simply strips read the Simply sanitizer; chlorine and bromine strips read chlorine or bromine.

Where this comes from

Every step and every rate on this page is Sirona’s own, read on 2026-11-15. Always read the label on the bottle in your hand: it is the one that counts.

Free checklist

The DFW month-by-month pool checklist

What it covers (12 months · 76 tasks · 12 marked critical):

  • Freeze nights (January and December): keep the pump running, and what to drain if the power goes out
  • The March opening: test everything, brush, shock, then balance alkalinity, pH and calcium
  • Summer: testing two or three times a week, the weekly shock, and what to do after rain or a party
  • Fall leaves, and easing the chemistry down for winter
Read it now — no email needed →

Email me the checklist

One email with a link to the printable checklist — print it, or save it as a PDF, from that page. That is all we send: no mailing list.

Retail Store

Visit Us Today

Stop by for free water testing, expert advice, and professional-grade supplies.

Simplified Pools

1611 Commons Cir Suite 100
Northlake, TX 76226

Get Directions →
Call Now
Book Service