Foamy hot tub water
Hot tub foam: why it happens and how to get rid of it
Foam is body oil, lotion and detergent whipped up by the jets, and soft water makes it worse. Knock it down with a defoamer, shock the water, and raise calcium hardness if it tests under 150 ppm.
From Sirona’s own directions and labels, checked on 2026-11-15. Where each part comes from
What you need
The products this guide uses
Bromine or chlorine tubSirona® Test strips - Chlorine and BromineThe strip to read a bromine or chlorine tub$13.99Shop
Simply tubSirona® Simply Test StripsThe strip that reads Simply Sanitizer, pH, alkalinity and hardness on a Simply tub$19.99Shop
Sirona® Foam OutKnocks foam down on the spot$32.99Shop
Bromine or chlorine tubSirona® Activate GranularActivates the bromide bank and shocks the water$32.99Shop Sirona® Calcium UpThe liquid: raises calcium hardness in soft fill water$11.99Shop
Sirona Calcium BoosterThe granular: raises calcium hardness in soft fill water$11.99Shop
Sirona® Spray & Rinse Filter CleanerThe quick between-soaks filter rinse$15.99Shop
Sirona® Filter CleanerThe overnight soak that actually restores a cartridge$29.99Shop
Sirona® Natural Clear Enzyme ClarifierEats the body oil and lotion that clouds a tub and clogs the filter$14.99Shop Get rid of it
Test the water first
pH, total alkalinity and calcium hardness. Soft water, under 150 ppm of calcium hardness, foams on its own.
Knock the foam down
A defoamer works on contact: put a little straight onto the foam with the jets running, and repeat if it has not gone.
Shock the water
The defoamer clears the surface; the shock removes what the foam is made of. Then check the sanitizer.
Raise calcium if the water is soft
Bring calcium hardness up into 150–250 ppm. Hardness is what stops soft water foaming, and it protects the heater too.
Clean the filter
The oils that made the foam are in the filter’s pleats as well.
If it comes straight back, change the water
Sirona’s third cause of foam is water carrying too much dissolved material, and the fix for that is fresh water.
Stop it coming back
Shower before you get in
Soap, lotion and detergent come in on skin and on swimsuits. Sirona’s own advice is a shower first.
Keep the weekly shock
A tub that is shocked every week does not build up the oils foam is made of.
Add an enzyme each week
An enzyme breaks down body oil and lotion between shocks.
What not to do
- Never add chemicals to the water when people are in the spa.
- NEVER mix chlorine and acid (or any two chemicals) together — toxic chlorine gas. Add each chemical to the water separately, circulating between additions
- Never add chlorine, bromine, a chlorine-based shock or a mineral cartridge to a Simply tub: Sirona says the Simply products are compatible only with the Simply system.
Free water testing at the store
Bring a sample. Leave with a plan for your tub.
A test strip is a rough read. At the counter we test the water and print a plan made for a hot tub, not a pool: each reading against its target, and what to add in the order to add it.
- Sized to your tub’s gallons, so bring the number with the sample.
- Every amount is taken from the product’s own label. A product whose label rate we have not read is named without an amount, never guessed.
- For bromine, chlorine or Simply. A Simply tub is never told to add chlorine or bromine.
Where
Simplified Pools
1611 Commons Cir Suite 100, Northlake, TX 76226
- Monday – Friday10am – 6pm
- Saturday10am – 3pm
- SundayClosed
No appointment is needed for a water test.
Questions people ask next
Why does my hot tub foam when the jets are on?
The jets whip air into water that has soap, body oil or lotion in it, or that is too soft. Sirona lists three causes: oils and detergents from bathers, low calcium hardness, and water that is due a change.
Does foam mean I need more chlorine or bromine?
No. Foam is a soap and soft-water problem. Shocking helps because it removes the oils, not because the sanitizer was low — though the sanitizer is worth checking while you are testing.
Will a defoamer fix hot tub foam for good?
It clears the surface straight away, but the oils are still in the water. Shock, clean the filter and check calcium hardness, or the foam returns.
Can I use the same foam products in a Simply tub?
The defoamer and the liquid calcium product, yes: Sirona lists the defoamer as compatible with all sanitizers and the liquid calcium product as compatible with biguanide sanitizers, which is what Simply is. The shock is different: a Simply tub takes Simply Oxidizer, never a chlorine or bromine shock.
- Cloudy hot tub waterCloudy hot tub water: what causes it and how to clear itThe five causes, in the order to check them, and the fix for each.
- Hot tub maintenanceWeekly hot tub care: the routine that keeps the water clearBefore every soak, once a week, once a month: the whole routine, system by system.
- Drain and refill a hot tubHow often to drain and refill a hot tub, and how to do itWhen the water is due a change, and the order to do it in.
Where this comes from
Every step and every rate on this page is Sirona’s own, read on 2026-11-15. Always read the label on the bottle in your hand: it is the one that counts.
- Sirona: How to Get Rid of Hot Tub Foam
- Sirona: Spa & Hot Tub Troubleshooting
- Sirona: Spa Care & Hot Tub FAQs
- The products’ own labels — the rates our store counter doses a hot tub with