Beatbot P300 Cordless Robotic Pool Cleaner
Product Overview
A reliable cordless robotic cleaner that actually masters waterline scrubbing without the hassle of a floating cable.
Unlike generic cordless pool vacuums that wander aimlessly, the Beatbot P300 utilizes SonicSense™ ultrasonic mapping and CleverNav™ path optimization to systematically clean floors, walls, and waterlines. Engineered with a high-performance multi-motor drive system and a 5,500 GPH suction rate, the P300 delivers extended cordless cleaning with reliable wall climbing and an industry-exclusive double-pass waterline scrubbing cycle. The included wireless charging dock and autonomous surface return make retrieval and recharging straightforward for any pool owner.
Customer Reviews
No reviews yet — bought this one? You'd be first.
The Beatbot P300 is a smart, cordless 3-in-1 robotic pool cleaner that covers the floor, walls, and waterline using SonicSense™ ultrasonic mapping and CleverNav™ intelligent path optimization for thorough, efficient coverage across any pool shape. Its industry-exclusive double-pass waterline scrubbing, 5,500 GPH suction, and high-capacity lithium battery deliver a deep, reliable clean without hoses, cords, or manual effort. When the cycle is complete, the P300 automatically surfaces and parks at the pool's edge for effortless, hook-free retrieval.
Full-Coverage Obstacle Navigation
The P300's SonicSense™ ultrasonic technology and 16 high-precision sensors continuously scan the pool environment in real time, automatically detecting and navigating around obstacles like drains, jets, ladders, and steps without interrupting the cleaning cycle. Four advanced guide wheels work alongside the sensor system to maintain consistent contact with pool surfaces through tight corners, curved walls, and hard-to-reach edges — areas where most robotic cleaners leave debris behind. Combined with CleverNav™ path optimization, the P300 methodically works through every inch of the pool in deliberate, non-overlapping passes, ensuring no zone is skipped and no obstacle sends it off course.
Fast Wireless Charging
The P300 is powered by a high-capacity 10,000mAh lithium battery that delivers up to 4 hours of continuous floor cleaning or 3.5 hours of wall and waterline cleaning on a single charge — enough to cover pools up to 3,230 sq ft in one uninterrupted session without resurfacing or pausing mid-cycle. When the cycle is complete, simply place the unit on the included wireless charging dock and it begins recharging automatically, reaching a full charge in approximately 4 hours with no cables to connect, no exposed ports to manage, and no risk of water ingress. The cordless design means setup is as simple as dropping the unit in the water, and the dock gives the P300 a consistent home base that keeps it charged and ready for the next cycle without any manual effort between uses.
Double-Pass Waterline Scrubbing
The P300 features an industry-exclusive double-pass waterline scrubbing system that cleans the waterline twice during every single cycle — delivering a deeper, more thorough clean than standard robotic cleaners that only make one pass. The waterline is one of the most demanding areas of any pool, where sunscreen residue, body oils, dirt, and organic debris accumulate into a persistent scum line that single-pass cleaners consistently leave behind. By scrubbing the waterline twice per pass using an optimized N-path cleaning pattern, the P300 breaks through this buildup more effectively and leaves the waterline consistently clean without any manual brushing or chemical pre-treatment required.
Watch every cleaning mode
Manufacturer-supplied feature clips.
Benefits & What Makes It Different
SonicSense™ & CleverNav™ Mapping
Ultrasonic sensors map your pool's exact shape to calculate the most efficient S- and N-path routes, minimizing missed spots.
5,500 GPH Suction Power
A high-capacity multi-motor drive system provides the heavy-duty lift needed to capture fine silt, leaves, and stubborn debris.
Smart Autonomous Surface Return
When the cleaning cycle finishes or the 10,000mAh battery runs low, the unit automatically drives to the surface and parks at the wall for easy hook retrieval.
Compatibility
- Safe for plaster, pebble, vinyl, and fiberglass pool surfaces
- Suitable for both in-ground and flat-bottom above-ground pools
- Compatible with freeform, rectangular, and L-shaped pool configurations
When To Use This
Pro Tip
To maximize the life of your P300's lithium battery, never store the unit in direct sunlight or in freezing temperatures, and always dry the charging contact area before placing it on the wireless dock.
Common Questions & Instructions
Can the Beatbot P300 climb walls and clean the waterline in a vinyl liner pool?
Yes, the Beatbot P300 is safe for all pool surfaces, including vinyl, fiberglass, plaster, and pebble. Its advanced multi-motor drive and guide wheels provide the traction needed for reliable wall climbing and dedicated double-pass waterline scrubbing without damaging delicate liners.
How long does the battery last on the Beatbot P300, and how do you charge it?
The P300 is powered by a 10,000mAh lithium battery that provides up to 3.5 hours of continuous floor cleaning or approximately 2.5 hours of combined floor, wall, and waterline cleaning. It recharges using an included wireless charging dock, eliminating exposed charging ports that can corrode.
How often do I need to clean the filter basket on this cordless robotic pool cleaner?
We recommend emptying and rinsing the dual-layer filtration basket after every cleaning cycle. This maintains the 5,500 GPH suction performance and prevents fine debris from drying and clogging the ultra-fine mesh elements.
Delivered today to your DFW neighborhood
Order this item by 2 PM Central on a weekday, and we'll have it on your driveway by evening. Same-day delivery is FREE to every ZIP in our DFW coverage area — no minimum — or it's free with our weekly service plan.
