Skip to content

Lantana, TX · 76226

Salt System Service & Repair in Lantana, TX

Diagnostics, cell replacement, and board-level repairs for Pentair IntelliChlor, Hayward AquaRite, and Jandy TruClear systems. We carry standard flow switches, power centers, and cells on the truck to resolve most faults on the initial visit.

⚡ Same-day when parts on truck

What our salt system service covers in Lantana

Diagnostic testing and repair for chlorine generation systems on residential pools across Denton and Collin counties. We test your water chemistry, inspect the electrolytic plates, verify incoming and output voltage, and repair or replace failed components to restore chlorine production.

  • ✓Pentair IntelliChlor (IC20, IC40, IC60) and IntelliChlor Power Centers
  • ✓Hayward AquaRite, AquaRite S3, and TurboCell (T-CELL-3, T-CELL-9, T-CELL-15) units
  • ✓Jandy TruClear and AquaPure / PureLink systems
  • ✓Electrolytic cell acid washing and scale removal
  • ✓Thermal and mechanical flow switch diagnostics and replacement
  • ✓Power center transformer, PCB, and rectifier bridge troubleshooting
  • ✓Salinity sensor calibration and independent digital salinity testing
  • ✓Automation integration between the salt generator and control boards

What we don't do (just so you know)

  • • Factory warranty processing — we diagnose the failure, document fault codes, and provide the paperwork you need to file with the manufacturer
  • • Underground conduit and electrical feeder line pulls back to the main household breaker
  • • Drain-and-refill services required if total dissolved solids (TDS) or stabilizer levels are too high for salt generation

Common salt system service symptoms we see in Lantana

Cell reads low salt or zero PPM when test strips show 3000 PPMFlashing inspect cell or clean cell light that stays on after cleaningNo flow warning light solid even though the pool pump runs at full speedSystem reports generating chlorine but pool free chlorine stays at 0 ppmBlank display panel or dead power center with tripped breakerCalcium scale buildup bridging the gap between titanium plates inside the housing

If you're seeing any of these, call (469) 455-1054 — most are diagnosable in one visit.

About salt system service in Lantana, TX

Lantana is a nationally recognized master-planned community spanning portions of Bartonville, Copper Canyon, and unincorporated Denton County. Developed starting in the 2000s, Lantana has grown into one of the most desirable residential communities in DFW North, featuring beautiful homes, excellent amenities (multiple pools, fitness center, parks, trails), and a strong community culture. The community includes the Lantana Golf Club and numerous neighborhood parks and gathering spaces. What sets Lantana apart for pool service is the high concentration of well-maintained, modern pools with quality equipment. Most homes were built between 2005 and 2020, featuring contemporary pool designs with automated equipment, salt chlorine generators, and thoughtful landscaping. The community's HOA standards ensure properties are well-maintained, and homeowners typically invest in quality pool care that matches their home's presentation. Located just 5 miles from our Northlake headquarters, Lantana is one of our most convenient service areas. Many of our team members live in or near Lantana and understand the community intimately.

Lantana water profile

Lantana is served by the Bartonville Water Supply Corporation and Denton County Fresh Water Supply District, providing municipal-quality water with moderate mineral content (300-400 ppm TDS). Water chemistry is consistent and well-suited for pool maintenance, particularly for the salt chlorine generators common in the community. Some western portions of Lantana may have slightly higher mineral content depending on the specific water supply district.

Lantana pool & equipment mix

Lantana pools are predominantly modern residential installations from 2005-2020. Most feature quality plaster or pebble finishes, cartridge filtration, variable-speed or dual-speed pumps, and salt chlorine generators. LED lighting and basic automation are common. Many homes feature integrated pool and spa designs with water features. Pool sizes typically range from 12,000 to 30,000 gallons. The consistent build quality across the community means our technicians know the common equipment configurations and can service them efficiently.

Neighborhoods we serve in Lantana

Lantana SouthLantana NorthLantana BartonvilleSandstoneLarkspurCascadesLantana Golf Club Area

Working salt system service jobs near…

Lantana Golf ClubLantana Community Amenity CentersLantana Trail SystemAdkins ElementaryLantana Town CenterE.P. Rayzor Elementary
"Living in Lantana, we love having Simplified Pools' store just down the road in Northlake. They handle our weekly service and whenever we need supplies, it's a quick trip. The team knows Lantana pools well — they service several of our neighbors too."
— Rachel & Dan K., Lantana Homeowners

Lantana salt system service questions

How fast can you get to my Lantana pool for salt system service?
Same-day visits are common in Lantana when we have parts on the truck — call (469) 455-1054 before 11 AM and we usually have someone out the same afternoon. We run daily routes through Denton County, including Bartonville and Flower Mound, so windshield time is rarely what holds a Lantana job up. After hours, next morning at the latest.
Does Lantana water affect salt system service?
Lantana is on municipal water (typically Upper Trinity Water District or DCUD), which is relatively clean — TDS under 500 ppm — but summer irrigation demand and Texas heat still push chemistry around. For salt system service that's mostly good news — the failures we see in Lantana are heat-cycle and chemistry-drift related rather than mineral, so they're more predictable and cheaper to stay ahead of. Many Lantana pools run salt chlorine generators, which changes how we dose the other chemicals.
Do you charge for the diagnostic visit even if I don't book the repair?
Yes — there's a flat diagnostic charge that we quote on the call before we send a tech. We waive it if you book the repair on the same visit. The diagnostic includes a written estimate so you can compare or get a second opinion before any work starts. We don't publish a fixed repair price online because every job is genuinely different — but you'll never get a surprise number.
Are you licensed and insured for pool work in Lantana?
Yes — we carry full general liability + workers' comp, and our techs are trained on every major brand (Pentair, Hayward, Jandy, Sta-Rite). We're a real local business in Argyle serving Lantana (76226), not a referral marketplace that sells your details to whoever answers first.
Do you bring parts on the first visit, or do I wait for a second visit for the repair?
We stock the most-common parts on every truck — pump seals, basket lids, cartridges, sand, filter o-rings, ignition components, salt-cell test kits. About 70% of repairs in Lantana finish on the first visit. The other 30% need a part order; we book the return for the next available slot, usually within 48 hours.
Why does my salt system read low salt when independent testing shows it is fine?
Salt cells do not directly measure salt grains; they estimate salinity by reading electrical conductivity between the titanium plates. If calcium scale coats the plates, the water temperature drops below roughly 52°F, or the plates have depleted their ruthenium coating, the cell registers higher resistance and reports low salt even when water salinity sits inside the standard 2700–3400 ppm range.
How long do pool salt cells last before needing replacement?
Most residential electrolytic cells have an operational life of 8,000 to 10,000 operating hours. For North Texas pools running year-round, that usually equals 3 to 5 years depending on the runtime percentage, pump schedule, and how often the cell has been cleaned with muriatic acid.
Can you just clean my cell instead of replacing it?
If the cell body is sound, the sensor functions, and the plates simply have white mineral scale, a dilute muriatic acid wash removes the deposits and restores conductivity. If the dark coating on the titanium plates has worn thin or flaked away, acid washing will not bring it back and the cell must be replaced.
Will a salt system work if my pool water chemistry is unbalanced?
The system will generate chlorine gas, but the water will not hold residual chlorine. If cyanuric acid is below 30–50 ppm, sunlight destroys the free chlorine within hours. If pH rises above 7.8—a frequent occurrence in salt pools due to aeration during electrolysis—the chlorine produced becomes significantly less effective as a sanitizer.

Lantana salt system service — call (469) 455-1054

Family-owned in Argyle. Real techs, real same-day service when we have parts on the truck.

Free checklist

The DFW month-by-month pool checklist

What it covers (12 months · 76 tasks · 12 marked critical):

  • Freeze nights (January and December): keep the pump running, and what to drain if the power goes out
  • The March opening: test everything, brush, shock, then balance alkalinity, pH and calcium
  • Summer: testing two or three times a week, the weekly shock, and what to do after rain or a party
  • Fall leaves, and easing the chemistry down for winter
Read it now — no email needed →

Email me the checklist

One email with a link to the printable checklist — print it, or save it as a PDF, from that page. That is all we send: no mailing list.

Retail Store

Visit Us Today

Stop by for free water testing, expert advice, and professional-grade supplies.

Simplified Pools

1611 Commons Cir Suite 100, Northlake, TX 76226
Northlake, TX 76226

Get Directions →
Call Now
Book Service