Skip to content
SIMPLIFIEDPOOLS

Lantana, TX · 76226

Pool Pump Replacement in Lantana, TX

Hydraulically sized pump replacements matched to your existing pad plumbing and electrical setup. We install variable-speed systems and program run schedules on-site.

Book online →Call (469) 455-1054

What our pool pump replacement covers in Lantana

Full removal of failed, seized, or inefficient pool pumps and installation of matched variable-speed or auxiliary units. We handle pipe reconfiguration, high-temp union install, bonding verification, and controller programming in a single visit.

  • ✓Pentair IntelliFlo3 VSF, SuperFlo VST, and WhisperFlo pump retrofits
  • ✓Hayward TriStar VS, Super Pump VS, and MaxFlo VS installations
  • ✓Jandy ePump, FloPro, and PlusHP variable-speed replacements
  • ✓Rebuilding suction and discharge plumbing to proper pipe diameter using schedule 40 PVC
  • ✓Installation of high-temp unions to prevent heat warping at intake and discharge ports
  • ✓Line-voltage wiring connection (115V or 230V) and equipment bonding wire attachment
  • ✓Low-voltage RS-485 automation tie-in for remote scheduling and speed control
  • ✓Flow rate calibration and freeze-protection speed configuration

What we don't do (just so you know)

  • • Running new main electrical feeds or adding subpanels from the home breaker
  • • Relocating equipment pads to a different section of the yard
  • • Warranty labor on equipment purchased by the homeowner from third-party online retailers

Common pool pump replacement symptoms we see in Lantana

Motor hums loudly on startup, overheats, and trips the pad breakerHigh-pitched screeching or rumbling from corroded motor shaft bearingsPump housing cracked, warped, or leaking along the seal plate seamsVariable-speed drive keypad unresponsive or displaying fatal drive-fault codesLoss of prime caused by suction port thread shrinkage from repeated run-dry eventsHigh electrical utility bills from outdated, single-speed induction motors

If you're seeing any of these, call (469) 455-1054 — most are diagnosable in one visit.

About pool pump replacement in Lantana, TX

Lantana is a nationally recognized master-planned community spanning portions of Bartonville, Copper Canyon, and unincorporated Denton County. Developed starting in the 2000s, Lantana has grown into one of the most desirable residential communities in DFW North, featuring beautiful homes, excellent amenities (multiple pools, fitness center, parks, trails), and a strong community culture. The community includes the Lantana Golf Club and numerous neighborhood parks and gathering spaces. What sets Lantana apart for pool service is the high concentration of well-maintained, modern pools with quality equipment. Most homes were built between 2005 and 2020, featuring contemporary pool designs with automated equipment, salt chlorine generators, and thoughtful landscaping. The community's HOA standards ensure properties are well-maintained, and homeowners typically invest in quality pool care that matches their home's presentation. Located just 5 miles from our Northlake headquarters, Lantana is one of our most convenient service areas. Many of our team members live in or near Lantana and understand the community intimately.

Lantana water profile

Lantana is served by the Bartonville Water Supply Corporation and Denton County Fresh Water Supply District, providing municipal-quality water with moderate mineral content (300-400 ppm TDS). Water chemistry is consistent and well-suited for pool maintenance, particularly for the salt chlorine generators common in the community. Some western portions of Lantana may have slightly higher mineral content depending on the specific water supply district.

Lantana pool & equipment mix

Lantana pools are predominantly modern residential installations from 2005-2020. Most feature quality plaster or pebble finishes, cartridge filtration, variable-speed or dual-speed pumps, and salt chlorine generators. LED lighting and basic automation are common. Many homes feature integrated pool and spa designs with water features. Pool sizes typically range from 12,000 to 30,000 gallons. The consistent build quality across the community means our technicians know the common equipment configurations and can service them efficiently.

Neighborhoods we serve in Lantana

Lantana SouthLantana NorthLantana BartonvilleSandstoneLarkspurCascadesLantana Golf Club Area

Working pool pump replacement jobs near…

Lantana Golf ClubLantana Community Amenity CentersLantana Trail SystemAdkins ElementaryLantana Town CenterE.P. Rayzor Elementary
"Living in Lantana, we love having Simplified Pools' store just down the road in Northlake. They handle our weekly service and whenever we need supplies, it's a quick trip. The team knows Lantana pools well — they service several of our neighbors too."
— Rachel & Dan K., Lantana Homeowners

Other things we handle in Lantana

Service

Pool Pump Repair

Service

Equipment Pad Replumb & Manifold Rebuild

Service

Pool Automation Repair

Service

Pool Filter Repair

Lantana pool pump replacement questions

How fast can you get to my Lantana pool for pool pump replacement?
Our usual Lantana response time is 24-48 hours after the first call, and we're already routing through Denton County most days. Diagnostic visits are scheduled within 1-2 business days.
Does Lantana water affect pool pump replacement?
Lantana is on municipal water (typically Upper Trinity Water District or DCUD), which is relatively clean — TDS under 500 ppm — but summer irrigation demand and Texas heat still push chemistry around. For pool pump replacement that's mostly good news — the failures we see in Lantana are heat-cycle and chemistry-drift related rather than mineral, so they're more predictable and cheaper to stay ahead of. Many Lantana pools run salt chlorine generators, which changes how we dose the other chemicals.
Do you charge for the diagnostic visit even if I don't book the repair?
Yes — there's a flat diagnostic charge that we quote on the call before we send a tech. We waive it if you book the repair on the same visit. The diagnostic includes a written estimate so you can compare or get a second opinion before any work starts. We don't publish a fixed repair price online because every job is genuinely different — but you'll never get a surprise number.
Are you licensed and insured for pool work in Lantana?
Yes — we carry full general liability + workers' comp, and our techs are trained on every major brand (Pentair, Hayward, Jandy, Sta-Rite). We're a real local business in Argyle serving Lantana (76226), not a referral marketplace that sells your details to whoever answers first.
Do you bring parts on the first visit, or do I wait for a second visit for the repair?
We stock the most-common parts on every truck — pump seals, basket lids, cartridges, sand, filter o-rings, ignition components, salt-cell test kits. About 70% of repairs in Lantana finish on the first visit. The other 30% need a part order; we book the return for the next available slot, usually within 48 hours.
Do I have to switch to a variable-speed pump when my old pump fails?
Current Department of Energy regulations require dedicated-purpose pool pumps above approximately one total horsepower to meet strict energy-efficiency ratings. Variable-speed pumps satisfy these standards and allow you to dial in lower RPMs for baseline filtration, which cuts daily wattage draw.
Can the new pump hook directly into my existing plumbing?
Pumps rarely share identical inlet and outlet heights across different models or generations. We cut out warped or undersized pipe and install fresh schedule 40 PVC with high-temperature unions so the new pump sits level without putting mechanical stress on the plumbing.
Will a new variable-speed pump work with my older automation system?
Most modern variable-speed pumps communicate with digital automation boards through an RS-485 connection. If your automation board does not support communication with the chosen pump line, we wire the pump to constant power and set its schedules directly through the pump onboard interface.

Lantana pool pump replacement — call (469) 455-1054

Family-owned in Argyle. Real techs, real same-day service when we have parts on the truck.

Book online(469) 455-1054

Free checklist

The DFW month-by-month pool checklist

What it covers (12 months · 76 tasks · 12 marked critical):

  • Freeze nights (January and December): keep the pump running, and what to drain if the power goes out
  • The March opening: test everything, brush, shock, then balance alkalinity, pH and calcium
  • Summer: testing two or three times a week, the weekly shock, and what to do after rain or a party
  • Fall leaves, and easing the chemistry down for winter
Read it now — no email needed →

Email me the checklist

One email with a link to the printable checklist — print it, or save it as a PDF, from that page. That is all we send: no mailing list.

Retail Store

Visit Us Today

Stop by for free water testing, expert advice, and professional-grade supplies.

Simplified Pools

1611 Commons Cir Suite 100, Northlake, TX 76226
Northlake, TX 76226

Get Directions →
Call Now
Book Service