Skip to content
SIMPLIFIEDPOOLS

Lantana, TX · 76226

Equipment Pad Replumb & Manifold Rebuild in Lantana, TX

Complete suction and return manifold reconstruction, valve upgrades, and flow reconfigurations. Built with Schedule 40/80 PVC, sweep elbows, and serviceable quick-disconnect unions.

Book online →Call (469) 455-1054

What our equipment pad replumb covers in Lantana

A full or partial reconstruction of the above-ground PVC plumbing on your equipment pad. We eliminate restrictive hard 90s, replace cracked or leaking glued connections, install serviceable diverter valves, and reconfigure crowded equipment layouts for clean hydraulic flow and easy maintenance access.

  • ✓Suction manifold rebuilds (skimmers, main drains, dedicated cleaner lines)
  • ✓Return manifold rebuilds (pool returns, spa jets, water features)
  • ✓Jandy NeverLube 2-way and 3-way diverter valve installations
  • ✓High-temperature CPVC and union installations at pump inlets and heater outlets
  • ✓Corrosion-resistant check valve placement between heaters and chlorinators or salt cells
  • ✓Sweep 90 elbows to reduce head loss and improve pump efficiency
  • ✓Equipment pad layout optimization and pad expansion planning
  • ✓Automated valve actuator mounting and mechanical stop calibration

What we don't do (just so you know)

  • • Underground pipe repairs beneath pool decking or soil (we refer out or diagnose via our leak detection service)
  • • Electrical subpanel upgrades or line-voltage conduit rewiring
  • • Warranty labor for customer-supplied second-hand equipment

Common equipment pad replumb symptoms we see in Lantana

Air leaks from cracked suction-side PVC fittings causing the pump to lose primeCrowded equipment pad layout making filter cartridge removal or pump lid access difficultPlumbing glued directly into pump ports with zero unions, requiring pipe cutting for routine serviceSun-baked, brittle PVC cracking at heater outlet pipes due to high thermal cyclesHigh filter pressure and poor circulation caused by excessive hard 90-degree elbowsStuck or leaking ball valves that cannot be rebuilt

If you're seeing any of these, call (469) 455-1054 — most are diagnosable in one visit.

About equipment pad replumb in Lantana, TX

Lantana is a nationally recognized master-planned community spanning portions of Bartonville, Copper Canyon, and unincorporated Denton County. Developed starting in the 2000s, Lantana has grown into one of the most desirable residential communities in DFW North, featuring beautiful homes, excellent amenities (multiple pools, fitness center, parks, trails), and a strong community culture. The community includes the Lantana Golf Club and numerous neighborhood parks and gathering spaces. What sets Lantana apart for pool service is the high concentration of well-maintained, modern pools with quality equipment. Most homes were built between 2005 and 2020, featuring contemporary pool designs with automated equipment, salt chlorine generators, and thoughtful landscaping. The community's HOA standards ensure properties are well-maintained, and homeowners typically invest in quality pool care that matches their home's presentation. Located just 5 miles from our Northlake headquarters, Lantana is one of our most convenient service areas. Many of our team members live in or near Lantana and understand the community intimately.

Lantana water profile

Lantana is served by the Bartonville Water Supply Corporation and Denton County Fresh Water Supply District, providing municipal-quality water with moderate mineral content (300-400 ppm TDS). Water chemistry is consistent and well-suited for pool maintenance, particularly for the salt chlorine generators common in the community. Some western portions of Lantana may have slightly higher mineral content depending on the specific water supply district.

Lantana pool & equipment mix

Lantana pools are predominantly modern residential installations from 2005-2020. Most feature quality plaster or pebble finishes, cartridge filtration, variable-speed or dual-speed pumps, and salt chlorine generators. LED lighting and basic automation are common. Many homes feature integrated pool and spa designs with water features. Pool sizes typically range from 12,000 to 30,000 gallons. The consistent build quality across the community means our technicians know the common equipment configurations and can service them efficiently.

Neighborhoods we serve in Lantana

Lantana SouthLantana NorthLantana BartonvilleSandstoneLarkspurCascadesLantana Golf Club Area

Working equipment pad replumb jobs near…

Lantana Golf ClubLantana Community Amenity CentersLantana Trail SystemAdkins ElementaryLantana Town CenterE.P. Rayzor Elementary
"Living in Lantana, we love having Simplified Pools' store just down the road in Northlake. They handle our weekly service and whenever we need supplies, it's a quick trip. The team knows Lantana pools well — they service several of our neighbors too."
— Rachel & Dan K., Lantana Homeowners

Other things we handle in Lantana

Service

Pool Pump Repair

Service

Pool Filter Repair

Service

Pool Heater Repair

Service

Pool Leak Detection

Lantana equipment pad replumb questions

How fast can you get to my Lantana pool for equipment pad replumb?
Our usual Lantana response time is 24-48 hours after the first call, and we're already routing through Denton County most days. Diagnostic visits are scheduled within 1-2 business days.
Does Lantana water affect equipment pad replumb?
Lantana is on municipal water (typically Upper Trinity Water District or DCUD), which is relatively clean — TDS under 500 ppm — but summer irrigation demand and Texas heat still push chemistry around. For equipment pad replumb that's mostly good news — the failures we see in Lantana are heat-cycle and chemistry-drift related rather than mineral, so they're more predictable and cheaper to stay ahead of. Many Lantana pools run salt chlorine generators, which changes how we dose the other chemicals.
Do you charge for the diagnostic visit even if I don't book the repair?
Yes — there's a flat diagnostic charge that we quote on the call before we send a tech. We waive it if you book the repair on the same visit. The diagnostic includes a written estimate so you can compare or get a second opinion before any work starts. We don't publish a fixed repair price online because every job is genuinely different — but you'll never get a surprise number.
Are you licensed and insured for pool work in Lantana?
Yes — we carry full general liability + workers' comp, and our techs are trained on every major brand (Pentair, Hayward, Jandy, Sta-Rite). We're a real local business in Argyle serving Lantana (76226), not a referral marketplace that sells your details to whoever answers first.
Do you bring parts on the first visit, or do I wait for a second visit for the repair?
We stock the most-common parts on every truck — pump seals, basket lids, cartridges, sand, filter o-rings, ignition components, salt-cell test kits. About 70% of repairs in Lantana finish on the first visit. The other 30% need a part order; we book the return for the next available slot, usually within 48 hours.
What is the standard equipment pad size for pool equipment?
A standard pool equipment pad size for a basic pool (single pump and filter) is typically 3x5 feet to 4x6 feet. For pools running a heater, salt system, booster pump, and automated valves, an equipment pad of 4x8 feet to 5x10 feet is required to maintain proper straight-pipe clearances (at least 5 times the pipe diameter on pump suction) and allow safe walking clearance for filter teardowns.
Why do you use Jandy NeverLube diverter valves instead of standard PVC ball valves?
Standard red-handle ball valves seize within 2 to 4 years of UV exposure and chemical contact, and once they fail, the pipe must be cut out. Jandy-style diverter valves are rebuildable from the top with replacement O-rings and diverters without ever cutting the PVC manifold.
Why are unions necessary on pool equipment plumbing?
Quick-disconnect unions allow a pump, filter, or salt cell to be disconnected and serviced in minutes without cutting the plumbing. Without unions, routine pump seal replacements or equipment swaps require cutting PVC, which quickly leaves no remaining pipe on the pad for future repairs.
How long after a replumb before the pool pump can be turned back on?
We use heavy-duty, fast-setting PVC cement and primer rated for pressurized pool applications. While initial set time is roughly 15 to 30 minutes, we generally recommend allowing 2 to 4 hours of full cure time before running the system at full operating pressure, especially on variable-speed pumps running high RPMs.

Lantana equipment pad replumb — call (469) 455-1054

Family-owned in Argyle. Real techs, real same-day service when we have parts on the truck.

Book online(469) 455-1054

Free checklist

The DFW month-by-month pool checklist

What it covers (12 months · 76 tasks · 12 marked critical):

  • Freeze nights (January and December): keep the pump running, and what to drain if the power goes out
  • The March opening: test everything, brush, shock, then balance alkalinity, pH and calcium
  • Summer: testing two or three times a week, the weekly shock, and what to do after rain or a party
  • Fall leaves, and easing the chemistry down for winter
Read it now — no email needed →

Email me the checklist

One email with a link to the printable checklist — print it, or save it as a PDF, from that page. That is all we send: no mailing list.

Retail Store

Visit Us Today

Stop by for free water testing, expert advice, and professional-grade supplies.

Simplified Pools

1611 Commons Cir Suite 100, Northlake, TX 76226
Northlake, TX 76226

Get Directions →
Call Now
Book Service