Skip to content
SIMPLIFIEDPOOLS

Harvest, TX · 76226 · 76247

Pool Light Replacement in Harvest, TX

Diagnostic and replacement for incandescent and LED pool lights, niche fixtures, and junction box wiring. Most cord pulls and fixture swaps finish in a single visit without draining your pool.

⚡ Same-day when parts on truck
Book online →Call (469) 455-1054

What our pool light replacement covers in Harvest

Diagnostic and replacement service for failed underwater pool and spa fixtures across line-voltage (120V) and low-voltage (12V) systems. Our technicians pull new cord through existing conduit back to the deck junction box, replace worn silicone or rubber lens gaskets, and test safety breakers before putting the light back into service.

  • ✓Pentair MicroBrite® 12V color LED fixtures and 1.5-inch nicheless wall fittings
  • ✓Amerlite 120V incandescent fixtures, 500 W pool flood light bulbs, and 8 3/8" lens gaskets
  • ✓Pentair IntelliBrite 5g color and white LED fixtures, including Uni-Tension wire clamp assemblies
  • ✓Hayward ColorLogic and Universal CrystaLogic 12V and 120V LED pool and spa fixtures
  • ✓Jandy WaterColors LED fixtures and niche adapters
  • ✓120V stainless RGBW LED fixtures with 50-foot and 100-foot cord runs
  • ✓Pool deck junction box wiring, 120V-to-12V step-down transformers, and GFCI breaker diagnostics

What we don't do (just so you know)

  • • Underground conduit collapses or severed pipes requiring concrete deck saw-cutting without a separate excavation scope
  • • Panel-level electrical repairs back at the main house breaker panel
  • • Filing factory warranty claims on your behalf — we document the failure so you can submit directly to the manufacturer

Common pool light replacement symptoms we see in Harvest

Light trips the GFCI breaker immediately when turned onWater visible behind the lens glass or inside the sealed light casingLED light stuck on one color or failing to cycle through modesLight fixture flickers, dims, or will not illuminateLight cord deteriorated or glued into conduit by calcification

If you're seeing any of these, call (469) 455-1054 — most are diagnosable in one visit.

About pool light replacement in Harvest, TX

Harvest is a globally recognized "agrihood" master-planned community that anchors the growth between Northlake and Argyle. Built around a working farm, a community lake, and massive lifestyle amenities, Harvest attracts families who are highly engaged in their property upkeep. Because we are headquartered right next door in Northlake, we are essentially the "hometown" pool service for Harvest residents. The pools in this community are predominantly newer, family-centric designs featuring tanning ledges, sheer descents, and cartridge filtration systems.

Harvest water profile

Municipal water supply yielding relatively soft, balanced water. The primary maintenance challenge in Harvest stems from the high density of new construction dust in the newer phases and the heavy bather load common with young families.

Harvest pool & equipment mix

Family-friendly designs, heavily leaning toward modern rectangular shapes, integrated spas, and salt water sanitation.

Neighborhoods we serve in Harvest

Harvest TownsideHarvest MeadowsHarvest WestThe Back Porch

Working pool light replacement jobs near…

Harvest FarmHarvest LakeThe Farmhouse CoffeeArgyle West Elementary
"We brought Simplified Pools on after our builder's pool company stopped showing up. They balanced the water perfectly and the salt cell is finally working right."
— Mark T., Harvest Resident

Other things we handle in Harvest

Service

Pool Automation Repair

Service

Pool Repair

Service

Pool Leak Detection

Service

Pool Equipment Upgrades

Harvest pool light replacement questions

How fast can you get to my Harvest pool for pool light replacement?
Same-day visits are common in Harvest when we have parts on the truck — call (469) 455-1054 before 11 AM and we usually have someone out the same afternoon. We run daily routes through Denton County, including Argyle and Northlake, so windshield time is rarely what holds a Harvest job up. After hours, next morning at the latest.
Does Harvest water affect pool light replacement?
Harvest is on municipal water (typically Upper Trinity Water District or DCUD), which is relatively clean — TDS under 500 ppm — but summer irrigation demand and Texas heat still push chemistry around. For pool light replacement that's mostly good news — the failures we see in Harvest are heat-cycle and chemistry-drift related rather than mineral, so they're more predictable and cheaper to stay ahead of. Many Harvest pools run salt chlorine generators, which changes how we dose the other chemicals.
Do you charge for the diagnostic visit even if I don't book the repair?
Yes — there's a flat diagnostic charge that we quote on the call before we send a tech. We waive it if you book the repair on the same visit. The diagnostic includes a written estimate so you can compare or get a second opinion before any work starts. We don't publish a fixed repair price online because every job is genuinely different — but you'll never get a surprise number.
Are you licensed and insured for pool work in Harvest?
Yes — we carry full general liability + workers' comp, and our techs are trained on every major brand (Pentair, Hayward, Jandy, Sta-Rite). We're a real local business in Argyle serving Harvest (76226, 76247), not a referral marketplace that sells your details to whoever answers first.
Do you bring parts on the first visit, or do I wait for a second visit for the repair?
We stock the most-common parts on every truck — pump seals, basket lids, cartridges, sand, filter o-rings, ignition components, salt-cell test kits. About 70% of repairs in Harvest finish on the first visit. The other 30% need a part order; we book the return for the next available slot, usually within 48 hours.
Do you need to drain the pool to replace the light?
No. Standard pool niches have several feet of cord coiled behind the fixture so it unhooks and rests on the deck for bulb and gasket swaps. For full fixture replacements, we secure the new cord to the old run and pull it through the conduit directly to the deck junction box with the pool full.
Why does the pool light trip the GFCI breaker?
Water intrusion is the most common cause. When moisture breaches a degraded lens gasket or a cracked cord jacket, current leaks to ground and trips the GFCI. Failing GFCI breakers or loose wiring inside the deck junction box can also trigger nuisance trips.
Can an old incandescent pool light be converted to LED?
Yes. If the niche and fixture ring are sound, you can swap the 500W incandescent bulb for an LED bulb and a fresh gasket. If the fixture is corroded, we pull a dedicated low-voltage or line-voltage LED fixture through the existing conduit to improve efficiency and avoid bulb seals entirely.

Harvest pool light replacement — call (469) 455-1054

Family-owned in Argyle. Real techs, real same-day service when we have parts on the truck.

Book online(469) 455-1054

Free checklist

The DFW month-by-month pool checklist

What it covers (12 months · 76 tasks · 12 marked critical):

  • Freeze nights (January and December): keep the pump running, and what to drain if the power goes out
  • The March opening: test everything, brush, shock, then balance alkalinity, pH and calcium
  • Summer: testing two or three times a week, the weekly shock, and what to do after rain or a party
  • Fall leaves, and easing the chemistry down for winter
Read it now — no email needed →

Email me the checklist

One email with a link to the printable checklist — print it, or save it as a PDF, from that page. That is all we send: no mailing list.

Retail Store

Visit Us Today

Stop by for free water testing, expert advice, and professional-grade supplies.

Simplified Pools

1611 Commons Cir Suite 100, Northlake, TX 76226
Northlake, TX 76226

Get Directions →
Call Now
Book Service