Poolife® Active Cleaning Granules

Poolife Active Cleaning Granules are designed to quickly and effectively kick bacteria, organic contaminants, and algae out of your pool water without adding Cyanuric Acid (CYA). Leaving you with crystal-clear pool water you can brag about!

~ A 2 in 1 Treatment, both a shock and sanitizer for your pool water.

~ Destroys bacteria, eliminates organic contaminants, and helps control algae.

~ Cal Hypo formula sanitizes pool water without adding any Cyanuric Acid (CYA).

~ Helps you maintain a 1-4 ppm chlorine level.

Dosage:

~ For unstable pools, add 6-8 ounces of this product per 10,000 gallons of pool water daily or as often as needed.

~ When used as a shock or for superchlorination, add 10-20 ounces of this product per 10,000 gallons of water to provide 5-10 ppm of available chlorine. Add every 7 days, or as necessary.

~ For stabilized pools, add 3-4 ounces per 10,000 gallons every other day or as often as needed to maintain the free available chlorine residual.

~ When used for winterization, gradually add 30 ounces of this product per 10,000 gallons of pool water.

Directions:

1. Only measure this product with a clean, dry scoop. This scoop should not be used for anything else.

2. If granules accumulate at the pool's bottom, brush them away.

3. Stay out of the pool until the free available chlorine level reaches 1-4 ppm, as recommended for each specific water treatment use.

4. For more specific instructions for your pool, please check the back of the said product or see the images provided above.

Active ingredient: 

~ Calcium Hypochlorite (Cal Hypo): 68%.

Available size(s): 25 lbs., 50 lbs. & 100 lbs.