Polaris Sweep Hose Scrubber
Product Overview
What pool techs reach for to prevent sweep hose wear and agitate fine debris on plaster and pebble surfaces.
Genuine Polaris 9-100-3105 sweep hose scrubbers are constructed from dense, closed-cell polyurethane foam designed to resist rapid degradation from chlorine and abrasive plaster finishes. Built specifically for the sweep tails on Polaris 280, 360, 380, 480 PRO, 3900 Sport, and TankTrax models, they buffer the tail nozzle against the pool shell while lifting settled dust and fine algae into the filtration stream.
Customer Reviews
No reviews yet — bought this one? You'd be first.
Benefits & What Makes It Different
OEM Density Formulation
Molded from chemical-resistant polyurethane foam that withstands sanitizer exposure without turning into mush or prematurely disintegrating.
Surface Protection
Buffers the rigid plastic tail nozzle to prevent scratching, etching, or marking on plaster, pebble, quartz, fiberglass, and vinyl pool surfaces.
Broad Cleaner Compatibility
Standard factory specification designed to slide snugly over the sweep hose tips of Polaris 280, 360, 380, 480 PRO, 3900 Sport, and TankTrax units.
Compatibility
- Polaris Vac-Sweep 280
- Polaris Vac-Sweep 360
- Polaris Vac-Sweep 380
- Polaris 480 PRO
- Polaris 3900 Sport
- Polaris 280 TankTrax
When To Use This
Pro Tip
When installing a new scrubber, dip it in warm pool water first and rotate it onto the tail jet rather than forcing it straight on. If you notice your scrubbers wearing down in less than a month, check your cleaner's sweep hose flow adjustment screw—throttling back excess flow reduces premature tail whip wear without sacrificing agitation.
Common Questions & Instructions
How often should Polaris sweep hose scrubbers be replaced?
Under normal operating conditions of 2 to 4 hours per day, a scrubber typically lasts 2 to 4 months on pebble surfaces and up to 6 months on smooth plaster or vinyl. Replace once worn down to the nozzle edge to prevent plastic-on-finish abrasion.
Why does my Polaris sweep hose scrubber wear out so quickly?
Rapid wear is almost always caused by excessive sweep tail speed (over 28-32 sweeps per minute), rough aggregate pool finishes, or low water balance and high sanitizer levels degrading the foam prematurely.
Can I run my Polaris cleaner without a sweep hose scrubber?
We advise against it. Running without a scrubber exposes the hard plastic sweep tip, which can scratch vinyl liners, leave wear marks on plaster, and significantly reduce the sweep tail's agitation efficiency.
Delivered today to your DFW neighborhood
Order this item by 2 PM Central on a weekday, and we'll have it on your driveway by evening. Same-day delivery is FREE to every ZIP in our DFW coverage area — no minimum — or it's free with our weekly service plan.
