PENTAIR Sweep Hose Scrubber for Legend/Legend II Cleaner
Product Overview
The standard specification foam tail scrubber for Pentair Legend series pressure cleaners.
Designed specifically for Pentair Legend and Legend II pressure-side cleaners, this OEM open-cell foam scrubber slips over the 1/2-inch sweep hose tail tip to dislodge fine silt and algae from pool floor corners. Unlike generic low-density foam pads that disintegrate within 3 to 4 weeks under high sanitizer levels, Pentair's dense polyurethane foam delivers 60 to 90 days of consistent surface agitation while preventing the plastic tail orifice from scuffing plaster or vinyl finishes.
Customer Reviews
No reviews yet — bought this one? You'd be first.
Benefits & What Makes It Different
High-Density Polyurethane Foam
Resists chemical degradation up to 4 ppm free chlorine, outlasting generic replacements by 30 to 60 days of daily cycling.
Surface Protection Spec
Prevents the rigid sweep tail tip from making direct contact with gunite, quartz, or vinyl liners, stopping surface gouges.
OEM Orifice Fit
Engineered to fit standard Pentair 1/2-inch sweep hose tips snugly without slipping off under 30 to 45 PSI booster pressure.
Compatibility
- Pentair Legend (LL105, LL105PM) pressure-side pool cleaners
- Pentair Legend II (LX2000, LX5000) pressure-side pool cleaners
- Pentair Legend Platinum & Truck Series cleaner models
- Standard 1/2-inch pressure sweep hose tail pipes and wear rings
When To Use This
Pro Tip
Rotate the scrubber 180 degrees every 2 to 3 weeks to distribute friction evenly across the foam body, extending its usable service life by up to 20 days.
Common Questions & Instructions
How often should I replace the Pentair Legend sweep hose scrubber?
Under standard operating conditions (6 to 8 hours daily pump run time), inspect the foam tail scrubber every 30 days and replace it once it wears down by 50% or roughly every 2 to 3 months to prevent the bare tail tip from scraping plaster.
Will this sweep hose scrubber fit other pool cleaner models?
Yes, this standard scrubber fits Pentair Legend, Legend II, Legend Platinum, and Kreepy Krauly Legend cleaners using standard 1/2-inch sweep hoses, as well as Polaris 180, 280, 380, and 3900 Sport tail assemblies requiring identical dimensions.
Why does my sweep hose scrubber wear out in less than 30 days?
Abrasive aggregate finishes like PebbleTec accelerate wear, but excessive booster pump pressure (above 40-45 PSI) or high sanitizer levels (free chlorine exceeding 5.0 ppm) will also prematurely break down polyurethane foam cells.
Delivered today to your DFW neighborhood
Order this item by 2 PM Central on a weekday, and we'll have it on your driveway by evening. Same-day delivery is FREE to every ZIP in our DFW coverage area — no minimum — or it's free with our weekly service plan.
