Instant Pool Water Conditioner®

Natural Chemistry’s Instant Pool Water Conditioner​ was created to stabilize chlorine from UV sunlight loss. Once added to your pool it begins working to protect chlorine. Natural Chemistry’s Instant Pool Water Conditioner​ is considered a salt, which means that it won't damage pool surfaces or equipment.

~ Easy and effective solution to protecting your pool.

~ Its liquid formula can be added directly to your pool water or through the skimmer to start working immediately.

~ No need for messy dilutions or pre-dissolving. 

Dosage:

~ Initially, add 1 gal per 10,000 gallons of water to raise your CYA to 32 ppm.

~ For regular maintenance, add 4 oz per 10,000 gallons of water to raise your CYA to 1 ppm.

Directions: Initial:

1. Shake your Instant Pool Water Conditioner well!

2.  While the circulation pump is operating, you have two options for adding Instant Pool Water Conditioner: either gradually pour it into the pool skimmer, or dispense it directly into the pool, making sure to walk around the pool's edge to ensure even distribution.

3. To aid quicker absorption, brushing the pool after adding the conditioner is recommended.

4. For the container, use pool water to rinse it thoroughly, then shake it to ensure any residue is dissolved. Add this rinsed solution either into the skimmer or directly into the pool.

 ~ Note: To determine the required dosage of Instant Pool Water Conditioner for a freshwater start-up (where no conditioner/stabilizer is already present), calculate it based on your pool's volume. You should divide your pool's total gallon volume by 10,000. The result will give you the number of gallons of Instant Pool Water Conditioner you need to add.

Directions: Maitenance:

1. Repeat the initial dosage process with the recommended dose of your Natural Chemistry Instant Pool Water Conditioner.

Active Ingredients:

~ Monosodium Cyanurate Monohydrate: 35%.

~ Other Ingredients: 65%.