Skip to content
HomeProductsBOOST-RITE O-RING KIT
PENTAIR
Click to enlarge
BOOST-RITE O-RING KIT
PENTAIR
Professional Choice

BOOST-RITE O-RING KIT

$25.97
In Stock Locally
Delivery in the DFW metroplex
Delivery to Your ZIP
Free Local PickupReady in 2hrs at Northlake, TX
DFW DeliveryFast shipping via local courier

Product Overview

Factory-spec elastomer seals engineered to resolve booster pump housing leaks without guesswork.

Water dripping from the housing seam on a Boost-Rite pump points directly to degraded internal seals. The Pentair ZBR12200 O-ring kit provides two genuine factory seals shaped specifically for the Boost-Rite Universal Booster Pump body. Installing OEM elastomer prevents suction air leaks and pressure loss that hamper pressure-side pool cleaners.

Customer Reviews

No reviews yet — bought this one? You'd be first.

Why Pool Pros Trust This

Benefits & What Makes It Different

Exact Factory Fit

Molded to match Pentair Boost-Rite casting tolerances, eliminating pinch risk and sealing failures common with universal assortments.

2-Piece Complete Kit

Supplies both replacement O-rings needed during a wet-end rebuild to fully restore internal casing and volute water-tightness.

Chemical-Resistant Elastomer

Formulated to resist hardening, swelling, and cracking caused by routine chlorination, ozone, and sanitizing chemicals.

Compatibility

  • Pentair Boost-Rite Universal Booster Pump
  • Pentair Boost-Rite LA01N Models

When To Use This

Eliminating water leaks between the booster pump housing and seal plateScheduled wet-end overhaul during a mechanical shaft seal replacementResolving air draw on the booster pump intake circuit

Pro Tip

Never use petroleum jelly or petroleum-based grease on these seals; it breaks down the elastomer within months. Coat them lightly with PTFE or silicone pool lube, and clear all calcium scale from the groove before seating.

Common Questions & Instructions

What pump does the Pentair ZBR12200 O-ring kit fit?

This 2-piece kit is manufactured specifically for the Pentair Boost-Rite Universal Booster Pump (LA01N and related Boost-Rite series) used to power pressure-side pool cleaners.

What symptoms indicate my booster pump O-rings need to be replaced?

Visible water dripping from the pump volute seam, air bubbles blowing out the cleaner wall fitting, or the booster pump losing prime during operation indicate dried, flattened, or cracked seals.

Can I install the ZBR12200 O-ring kit myself?

Yes, this repair is DIY-friendly. Disconnect power at the breaker, remove the housing bolts, clean the O-ring channels thoroughly, lubricate the new rings with a silicone-based pool lubricant, and reassemble evenly.

Same-Day DFW Delivery

Delivered today to your DFW neighborhood

Order this item by 2 PM Central on a weekday, and we'll have it on your driveway by evening. Same-day delivery is FREE to every ZIP in our DFW coverage area — no minimum — or it's free with our weekly service plan.

Free checklist

The DFW month-by-month pool checklist

What it covers (12 months · 76 tasks · 12 marked critical):

  • Freeze nights (January and December): keep the pump running, and what to drain if the power goes out
  • The March opening: test everything, brush, shock, then balance alkalinity, pH and calcium
  • Summer: testing two or three times a week, the weekly shock, and what to do after rain or a party
  • Fall leaves, and easing the chemistry down for winter
Read it now — no email needed →

Email me the checklist

One email with a link to the printable checklist — print it, or save it as a PDF, from that page. That is all we send: no mailing list.

Retail Store

Visit Us Today

Stop by for free water testing, expert advice, and professional-grade supplies.

Simplified Pools

1611 Commons Cir Suite 100, Northlake, TX 76226
Northlake, TX 76226

Get Directions →