6' Pump Hose for Polaris® PB4-60/PB4-60Q Booster Pump
Product Overview
Direct OEM replacement hose engineered to hold booster pump discharge pressure without collapsing or splitting.
Polaris manufactures durable, high-efficiency parts designed to withstand the sustained high-pressure output of dedicated cleaner systems. Measuring six feet in length, this genuine Polaris reinforced hose connects the PB4-60 or PB4-60Q booster pump to your pool's dedicated sweep return line. Its internal woven reinforcement layer resists cyclical pressure spikes, preventing the blowouts common with generic vinyl tubing.
Customer Reviews
No reviews yet — bought this one? You'd be first.
Benefits & What Makes It Different
Internal Fiber Reinforcement
Constructed with woven reinforcement layers to withstand cyclical pressure spikes up to booster pump operating levels without ballooning.
Direct OEM Specification
Sized precisely at 6 feet for standard pad layouts between the filtration loop, booster pump, and dedicated cleaner return line.
UV and Chemical Resistance
Engineered rubberized polymer compound resists premature brittleness and cracking caused by direct sunlight exposure and chlorinated water.
Compatibility
- Polaris PB4-60 Booster Pumps
- Polaris PB4-60Q Booster Pumps
- Standard Polaris 3/4-inch barbed quick-connect booster fittings
When To Use This
Pro Tip
Dip the ends of the hose in warm water for 15 to 20 seconds before pushing them over the barbed pump fittings. This softens the reinforced polymer just enough to slide on flush without scoring the interior wall.
Common Questions & Instructions
When should I replace the hose on my Polaris PB4-60 booster pump?
Replace this hose whenever you notice pinhole leaks, visible surface crazing, stiffness from sun exposure, or if the hose softens and balloons under operating pressure. A degraded hose risks splitting and draining water from the equipment pad.
Can I use standard vinyl tubing instead of the Polaris reinforced hose?
Standard smooth vinyl tubing lacks the internal reinforcement braiding required to handle the sustained discharge pressures produced by a PB4-60 or PB4-60Q booster pump. Non-reinforced hose will quickly swell, kink, or rupture under load.
How difficult is it to install this replacement booster pump hose?
Installation is straightforward and DIY-friendly. Cut the hose to the required length using a sharp utility knife, slip on the connector nuts, and secure the hose onto the barbed fittings, avoiding sharp bends that could restrict water flow.
Delivered today to your DFW neighborhood
Order this item by 2 PM Central on a weekday, and we'll have it on your driveway by evening. Same-day delivery is FREE to every ZIP in our DFW coverage area — no minimum — or it's free with our weekly service plan.
