
2" Plastic Pressure Gauge 0.25" 0-60 PSI with Indicator Bezel Back Mount
Product Overview
A clean-reading 0–60 PSI rear-mount gauge with a rotatable bezel that marks exactly when to clean your filter.
Manufactured by Super-Pro, this 2-inch plastic pressure gauge reads from 0 to 60 PSI via a standard 0.25-inch NPT back-mount thread. The built-in indicator bezel lets you physically set clean and dirty reference points to take the guesswork out of backwashing or cartridge cleaning. Standard label spec confirms it is engineered strictly for water filtration environments (not for oxygen use).
Customer Reviews
No reviews yet — bought this one? You'd be first.
Benefits & What Makes It Different
Rotatable Indicator Bezel
Allows you to mark your baseline clean pressure and clearly see when an 8–10 PSI rise signals backwash time.
Standard 0.25-Inch NPT Back Mount
Threads directly into common manual air relief valve assemblies found across residential filter tanks.
Corrosion-Resistant Plastic Body
Withstands continuous exposure to UV rays, pool chemicals, and moisture without the rusting common to stamped steel shells.
Compatibility
- Fits manual air relief valves with standard 0.25" (1/4" NPT) female threads
- Compatible with Hayward Pro-Grid, SwimClear, and Perflex filter relief assemblies
- Compatible with Pentair Clean & Clear, FNS Plus, and Warrior filter air bleeds
- Compatible with Jandy CL, CV, and DEV filter air release valves
When To Use This
Pro Tip
Never tighten this gauge by gripping the outer plastic bezel—twisting the case shears internal calibration pins. Always use a small open-end wrench on the brass flats at the base of the 0.25-inch stem. Also remember the label warning: this unit is rated for water pressure, not for oxygen use.
Common Questions & Instructions
How do I tell if my existing filter pressure gauge has failed?
If the needle stays above zero when the pump turns completely off, remains frozen at one number during operation, or weeps water from the back of the casing, the internal bourdon tube has failed.
How do I install a 0.25-inch back-mount pressure gauge without cracking it?
Wrap 2 to 3 turns of PTFE tape clockwise around the brass threads. Hand-thread the gauge into the port, then use a small open-end wrench on the brass wrench flats at the stem base—never twist the plastic housing.
What is the operating pressure range of this Super-Pro gauge?
The gauge reads accurately from 0 to 60 PSI, which accommodates the operating ranges of residential sand, cartridge, and DE filter systems (most run between 8 and 25 PSI).
Delivered today to your DFW neighborhood
Order this item by 2 PM Central on a weekday, and we'll have it on your driveway by evening. Same-day delivery is FREE to every ZIP in our DFW coverage area — no minimum — or it's free with our weekly service plan.



