Skip to content
SIMPLIFIEDPOOLS

Pecan Square, TX · 76247

Salt System Service & Repair in Pecan Square, TX

Diagnostics, cell replacement, and board-level repairs for Pentair IntelliChlor, Hayward AquaRite, and Jandy TruClear systems. We carry standard flow switches, power centers, and cells on the truck to resolve most faults on the initial visit.

⚡ Same-day when parts on truck
Book online →Call (469) 455-1054

What our salt system service covers in Pecan Square

Diagnostic testing and repair for chlorine generation systems on residential pools across Denton and Collin counties. We test your water chemistry, inspect the electrolytic plates, verify incoming and output voltage, and repair or replace failed components to restore chlorine production.

  • ✓Pentair IntelliChlor (IC20, IC40, IC60) and IntelliChlor Power Centers
  • ✓Hayward AquaRite, AquaRite S3, and TurboCell (T-CELL-3, T-CELL-9, T-CELL-15) units
  • ✓Jandy TruClear and AquaPure / PureLink systems
  • ✓Electrolytic cell acid washing and scale removal
  • ✓Thermal and mechanical flow switch diagnostics and replacement
  • ✓Power center transformer, PCB, and rectifier bridge troubleshooting
  • ✓Salinity sensor calibration and independent digital salinity testing
  • ✓Automation integration between the salt generator and control boards

What we don't do (just so you know)

  • • Factory warranty processing — we diagnose the failure, document fault codes, and provide the paperwork you need to file with the manufacturer
  • • Underground conduit and electrical feeder line pulls back to the main household breaker
  • • Drain-and-refill services required if total dissolved solids (TDS) or stabilizer levels are too high for salt generation

Common salt system service symptoms we see in Pecan Square

Cell reads low salt or zero PPM when test strips show 3000 PPMFlashing inspect cell or clean cell light that stays on after cleaningNo flow warning light solid even though the pool pump runs at full speedSystem reports generating chlorine but pool free chlorine stays at 0 ppmBlank display panel or dead power center with tripped breakerCalcium scale buildup bridging the gap between titanium plates inside the housing

If you're seeing any of these, call (469) 455-1054 — most are diagnosable in one visit.

About salt system service in Pecan Square, TX

Pecan Square is an award-winning master-planned community built around a modern interpretation of a classic Texas town square. As one of the newest and most rapidly expanding neighborhoods in Northlake/Justin, it features hundreds of brand-new luxury pools built by top-tier DFW contractors. Because these are new construction pools, initial startup chemistry and equipment commissioning is critical to protect the fresh plaster. We specialize in taking over pools post-construction and ensuring the warranty remains intact.

Pecan Square water profile

Brand new municipal infrastructure. The primary focus is managing the high pH spikes that occur naturally during the first 12 months of new plaster curing.

Pecan Square pool & equipment mix

Ultra-modern designs, predominantly featuring dark pebble finishes, extensive hardscaping, and cutting-edge energy-efficient variable-speed pumps.

Neighborhoods we serve in Pecan Square

The SquareJackson Hall AreaPecan Square EstatesThe Greeting House

Working salt system service jobs near…

Jackson HallThe ArenaPecan Square Co-WorkingJohn M. Tidwell Middle School
"Our pool builder recommended Simplified Pools to take over after the build was done. They've been fantastic at explaining how all the new digital equipment works."
— Sarah & Mike L., Pecan Square

Other things we handle in Pecan Square

Service

Salt Cell Service & Replacement

Service

Pool Repair

Service

Pool Automation Repair

Service

Pentair Repair

Pool chemicals

Pool Salt

Same-day delivery in Pecan Square

Pool chemicals

Muriatic Acid

Same-day delivery in Pecan Square

Pecan Square salt system service questions

How fast can you get to my Pecan Square pool for salt system service?
Same-day visits are common in Pecan Square when we have parts on the truck — call (469) 455-1054 before 11 AM and we usually have someone out the same afternoon. We run daily routes through Denton County, including Northlake and Justin, so windshield time is rarely what holds a Pecan Square job up. After hours, next morning at the latest.
Does Pecan Square water affect salt system service?
Pecan Square is on municipal water (typically Upper Trinity Water District or DCUD), which is relatively clean — TDS under 500 ppm — but summer irrigation demand and Texas heat still push chemistry around. For salt system service that's mostly good news — the failures we see in Pecan Square are heat-cycle and chemistry-drift related rather than mineral, so they're more predictable and cheaper to stay ahead of. Most Pecan Square pools are plaster or pebble — finishes that show staining fast if chemistry slips.
Do you charge for the diagnostic visit even if I don't book the repair?
Yes — there's a flat diagnostic charge that we quote on the call before we send a tech. We waive it if you book the repair on the same visit. The diagnostic includes a written estimate so you can compare or get a second opinion before any work starts. We don't publish a fixed repair price online because every job is genuinely different — but you'll never get a surprise number.
Are you licensed and insured for pool work in Pecan Square?
Yes — we carry full general liability + workers' comp, and our techs are trained on every major brand (Pentair, Hayward, Jandy, Sta-Rite). We're a real local business in Argyle serving Pecan Square (76247), not a referral marketplace that sells your details to whoever answers first.
Do you bring parts on the first visit, or do I wait for a second visit for the repair?
We stock the most-common parts on every truck — pump seals, basket lids, cartridges, sand, filter o-rings, ignition components, salt-cell test kits. About 70% of repairs in Pecan Square finish on the first visit. The other 30% need a part order; we book the return for the next available slot, usually within 48 hours.
Why does my salt system read low salt when independent testing shows it is fine?
Salt cells do not directly measure salt grains; they estimate salinity by reading electrical conductivity between the titanium plates. If calcium scale coats the plates, the water temperature drops below roughly 52°F, or the plates have depleted their ruthenium coating, the cell registers higher resistance and reports low salt even when water salinity sits inside the standard 2700–3400 ppm range.
How long do pool salt cells last before needing replacement?
Most residential electrolytic cells have an operational life of 8,000 to 10,000 operating hours. For North Texas pools running year-round, that usually equals 3 to 5 years depending on the runtime percentage, pump schedule, and how often the cell has been cleaned with muriatic acid.
Can you just clean my cell instead of replacing it?
If the cell body is sound, the sensor functions, and the plates simply have white mineral scale, a dilute muriatic acid wash removes the deposits and restores conductivity. If the dark coating on the titanium plates has worn thin or flaked away, acid washing will not bring it back and the cell must be replaced.
Will a salt system work if my pool water chemistry is unbalanced?
The system will generate chlorine gas, but the water will not hold residual chlorine. If cyanuric acid is below 30–50 ppm, sunlight destroys the free chlorine within hours. If pH rises above 7.8—a frequent occurrence in salt pools due to aeration during electrolysis—the chlorine produced becomes significantly less effective as a sanitizer.

Pecan Square salt system service — call (469) 455-1054

Family-owned in Argyle. Real techs, real same-day service when we have parts on the truck.

Book online(469) 455-1054

Free checklist

The DFW month-by-month pool checklist

What it covers (12 months · 76 tasks · 12 marked critical):

  • Freeze nights (January and December): keep the pump running, and what to drain if the power goes out
  • The March opening: test everything, brush, shock, then balance alkalinity, pH and calcium
  • Summer: testing two or three times a week, the weekly shock, and what to do after rain or a party
  • Fall leaves, and easing the chemistry down for winter
Read it now — no email needed →

Email me the checklist

One email with a link to the printable checklist — print it, or save it as a PDF, from that page. That is all we send: no mailing list.

Retail Store

Visit Us Today

Stop by for free water testing, expert advice, and professional-grade supplies.

Simplified Pools

1611 Commons Cir Suite 100, Northlake, TX 76226
Northlake, TX 76226

Get Directions →
Call Now
Book Service