Skip to content

Highland Village, TX · 75077

Salt System Service & Repair in Highland Village, TX

Diagnostics, cell replacement, and board-level repairs for Pentair IntelliChlor, Hayward AquaRite, and Jandy TruClear systems. We carry standard flow switches, power centers, and cells on the truck to resolve most faults on the initial visit.

⚡ Same-day when parts on truck

What our salt system service covers in Highland Village

Diagnostic testing and repair for chlorine generation systems on residential pools across Denton and Collin counties. We test your water chemistry, inspect the electrolytic plates, verify incoming and output voltage, and repair or replace failed components to restore chlorine production.

  • ✓Pentair IntelliChlor (IC20, IC40, IC60) and IntelliChlor Power Centers
  • ✓Hayward AquaRite, AquaRite S3, and TurboCell (T-CELL-3, T-CELL-9, T-CELL-15) units
  • ✓Jandy TruClear and AquaPure / PureLink systems
  • ✓Electrolytic cell acid washing and scale removal
  • ✓Thermal and mechanical flow switch diagnostics and replacement
  • ✓Power center transformer, PCB, and rectifier bridge troubleshooting
  • ✓Salinity sensor calibration and independent digital salinity testing
  • ✓Automation integration between the salt generator and control boards

What we don't do (just so you know)

  • • Factory warranty processing — we diagnose the failure, document fault codes, and provide the paperwork you need to file with the manufacturer
  • • Underground conduit and electrical feeder line pulls back to the main household breaker
  • • Drain-and-refill services required if total dissolved solids (TDS) or stabilizer levels are too high for salt generation

Common salt system service symptoms we see in Highland Village

Cell reads low salt or zero PPM when test strips show 3000 PPMFlashing inspect cell or clean cell light that stays on after cleaningNo flow warning light solid even though the pool pump runs at full speedSystem reports generating chlorine but pool free chlorine stays at 0 ppmBlank display panel or dead power center with tripped breakerCalcium scale buildup bridging the gap between titanium plates inside the housing

If you're seeing any of these, call (469) 455-1054 — most are diagnosable in one visit.

About salt system service in Highland Village, TX

Highland Village consistently ranks among the best places to live in DFW and all of Texas, known for excellent Lewisville ISD schools, safe neighborhoods, strong property values, and an engaged community culture. Nestled between Lewisville Lake and the Flower Mound community, Highland Village offers a premium suburban lifestyle that attracts families who invest significantly in their homes and outdoor living spaces. The high density of residential pools here reflects the community's emphasis on outdoor entertainment and family recreation. Most Highland Village neighborhoods were built in the 1990s and 2000s, meaning many pools are 15-25 years old — an age where equipment optimization and surface refinishing become important considerations. The municipal water system provides good quality water from the DFW system, making chemical management relatively straightforward compared to well-water communities. Highland Village homeowners are discerning customers who research service providers carefully, value consistency and communication, and expect their pool to look perfect for neighborhood gatherings and family events. Our commitment to detailed service reports, transparent pricing, and reliable scheduling resonates strongly with the Highland Village community. Located just 8 miles from our Northlake headquarters, Highland Village is one of our most efficient service areas with multiple weekly routes covering every neighborhood.

Highland Village water profile

Highland Village is served by the City of Highland Village municipal water system, receiving treated water from the DFW Water supply. Water quality is good with moderate mineral content (250-350 ppm TDS) and reasonable calcium hardness (200-300 ppm). The water is consistent year-round and relatively easy to manage chemically. Primary maintenance focus is on equipment condition and optimization rather than fighting challenging water chemistry.

Highland Village pool & equipment mix

Highland Village pools are predominantly established installations from the 1990s-2000s housing boom. Most feature plaster or pebble finishes with sand or cartridge filtration. Many pools still have original single-speed pumps that are excellent candidates for variable-speed upgrades. Newer renovations in the area increasingly include salt chlorine generators, LED lighting, and automation systems. Pool sizes typically range from 12,000 to 30,000 gallons, with some properties featuring resort-style installations with spas and water features.

Neighborhoods we serve in Highland Village

The HighlandsHighland ShoresSellmeyer EstatesHighland MeadowsThe WoodsLakewood HillsHighland Village Estates

Working salt system service jobs near…

The Shops at Highland VillageLewisville LakeDoubletree Ranch ParkHighland Village City HallBriarhill Middle SchoolLewisville ISD Schools
"Our Highland Village pool was built in 2003 and needed some updating. Simplified Pools not only handles our weekly maintenance perfectly, but they helped us upgrade to a variable-speed pump that cut our electric bill significantly. Honest, knowledgeable, and always on time."
— Karen & Steve L., Highland Village Residents

Highland Village salt system service questions

How fast can you get to my Highland Village pool for salt system service?
Same-day visits are common in Highland Village when we have parts on the truck — call (469) 455-1054 before 11 AM and we usually have someone out the same afternoon. We run daily routes through Denton County, including Flower Mound and Lewisville, so windshield time is rarely what holds a Highland Village job up. After hours, next morning at the latest.
Does Highland Village water affect salt system service?
Highland Village is on municipal water (typically Upper Trinity Water District or DCUD), which is relatively clean — TDS under 500 ppm — but summer irrigation demand and Texas heat still push chemistry around. For salt system service that's mostly good news — the failures we see in Highland Village are heat-cycle and chemistry-drift related rather than mineral, so they're more predictable and cheaper to stay ahead of. Many Highland Village pools run salt chlorine generators, which changes how we dose the other chemicals.
Do you charge for the diagnostic visit even if I don't book the repair?
Yes — there's a flat diagnostic charge that we quote on the call before we send a tech. We waive it if you book the repair on the same visit. The diagnostic includes a written estimate so you can compare or get a second opinion before any work starts. We don't publish a fixed repair price online because every job is genuinely different — but you'll never get a surprise number.
Are you licensed and insured for pool work in Highland Village?
Yes — we carry full general liability + workers' comp, and our techs are trained on every major brand (Pentair, Hayward, Jandy, Sta-Rite). We're a real local business in Argyle serving Highland Village (75077), not a referral marketplace that sells your details to whoever answers first.
Do you bring parts on the first visit, or do I wait for a second visit for the repair?
We stock the most-common parts on every truck — pump seals, basket lids, cartridges, sand, filter o-rings, ignition components, salt-cell test kits. About 70% of repairs in Highland Village finish on the first visit. The other 30% need a part order; we book the return for the next available slot, usually within 48 hours.
Why does my salt system read low salt when independent testing shows it is fine?
Salt cells do not directly measure salt grains; they estimate salinity by reading electrical conductivity between the titanium plates. If calcium scale coats the plates, the water temperature drops below roughly 52°F, or the plates have depleted their ruthenium coating, the cell registers higher resistance and reports low salt even when water salinity sits inside the standard 2700–3400 ppm range.
How long do pool salt cells last before needing replacement?
Most residential electrolytic cells have an operational life of 8,000 to 10,000 operating hours. For North Texas pools running year-round, that usually equals 3 to 5 years depending on the runtime percentage, pump schedule, and how often the cell has been cleaned with muriatic acid.
Can you just clean my cell instead of replacing it?
If the cell body is sound, the sensor functions, and the plates simply have white mineral scale, a dilute muriatic acid wash removes the deposits and restores conductivity. If the dark coating on the titanium plates has worn thin or flaked away, acid washing will not bring it back and the cell must be replaced.
Will a salt system work if my pool water chemistry is unbalanced?
The system will generate chlorine gas, but the water will not hold residual chlorine. If cyanuric acid is below 30–50 ppm, sunlight destroys the free chlorine within hours. If pH rises above 7.8—a frequent occurrence in salt pools due to aeration during electrolysis—the chlorine produced becomes significantly less effective as a sanitizer.

Highland Village salt system service — call (469) 455-1054

Family-owned in Argyle. Real techs, real same-day service when we have parts on the truck.

Free checklist

The DFW month-by-month pool checklist

What it covers (12 months · 76 tasks · 12 marked critical):

  • Freeze nights (January and December): keep the pump running, and what to drain if the power goes out
  • The March opening: test everything, brush, shock, then balance alkalinity, pH and calcium
  • Summer: testing two or three times a week, the weekly shock, and what to do after rain or a party
  • Fall leaves, and easing the chemistry down for winter
Read it now — no email needed →

Email me the checklist

One email with a link to the printable checklist — print it, or save it as a PDF, from that page. That is all we send: no mailing list.

Retail Store

Visit Us Today

Stop by for free water testing, expert advice, and professional-grade supplies.

Simplified Pools

1611 Commons Cir Suite 100, Northlake, TX 76226
Northlake, TX 76226

Get Directions →
Call Now
Book Service