Skip to content
SIMPLIFIEDPOOLS

Pecan Square, TX · 76247

Pool Pump Replacement in Pecan Square, TX

Hydraulically sized pump replacements matched to your existing pad plumbing and electrical setup. We install variable-speed systems and program run schedules on-site.

Book online →Call (469) 455-1054

What our pool pump replacement covers in Pecan Square

Full removal of failed, seized, or inefficient pool pumps and installation of matched variable-speed or auxiliary units. We handle pipe reconfiguration, high-temp union install, bonding verification, and controller programming in a single visit.

  • ✓Pentair IntelliFlo3 VSF, SuperFlo VST, and WhisperFlo pump retrofits
  • ✓Hayward TriStar VS, Super Pump VS, and MaxFlo VS installations
  • ✓Jandy ePump, FloPro, and PlusHP variable-speed replacements
  • ✓Rebuilding suction and discharge plumbing to proper pipe diameter using schedule 40 PVC
  • ✓Installation of high-temp unions to prevent heat warping at intake and discharge ports
  • ✓Line-voltage wiring connection (115V or 230V) and equipment bonding wire attachment
  • ✓Low-voltage RS-485 automation tie-in for remote scheduling and speed control
  • ✓Flow rate calibration and freeze-protection speed configuration

What we don't do (just so you know)

  • • Running new main electrical feeds or adding subpanels from the home breaker
  • • Relocating equipment pads to a different section of the yard
  • • Warranty labor on equipment purchased by the homeowner from third-party online retailers

Common pool pump replacement symptoms we see in Pecan Square

Motor hums loudly on startup, overheats, and trips the pad breakerHigh-pitched screeching or rumbling from corroded motor shaft bearingsPump housing cracked, warped, or leaking along the seal plate seamsVariable-speed drive keypad unresponsive or displaying fatal drive-fault codesLoss of prime caused by suction port thread shrinkage from repeated run-dry eventsHigh electrical utility bills from outdated, single-speed induction motors

If you're seeing any of these, call (469) 455-1054 — most are diagnosable in one visit.

About pool pump replacement in Pecan Square, TX

Pecan Square is an award-winning master-planned community built around a modern interpretation of a classic Texas town square. As one of the newest and most rapidly expanding neighborhoods in Northlake/Justin, it features hundreds of brand-new luxury pools built by top-tier DFW contractors. Because these are new construction pools, initial startup chemistry and equipment commissioning is critical to protect the fresh plaster. We specialize in taking over pools post-construction and ensuring the warranty remains intact.

Pecan Square water profile

Brand new municipal infrastructure. The primary focus is managing the high pH spikes that occur naturally during the first 12 months of new plaster curing.

Pecan Square pool & equipment mix

Ultra-modern designs, predominantly featuring dark pebble finishes, extensive hardscaping, and cutting-edge energy-efficient variable-speed pumps.

Neighborhoods we serve in Pecan Square

The SquareJackson Hall AreaPecan Square EstatesThe Greeting House

Working pool pump replacement jobs near…

Jackson HallThe ArenaPecan Square Co-WorkingJohn M. Tidwell Middle School
"Our pool builder recommended Simplified Pools to take over after the build was done. They've been fantastic at explaining how all the new digital equipment works."
— Sarah & Mike L., Pecan Square

Other things we handle in Pecan Square

Service

Pool Pump Repair

Service

Equipment Pad Replumb & Manifold Rebuild

Service

Pool Automation Repair

Service

Pool Filter Repair

Pecan Square pool pump replacement questions

How fast can you get to my Pecan Square pool for pool pump replacement?
Our usual Pecan Square response time is 24-48 hours after the first call, and we're already routing through Denton County most days. Diagnostic visits are scheduled within 1-2 business days.
Does Pecan Square water affect pool pump replacement?
Pecan Square is on municipal water (typically Upper Trinity Water District or DCUD), which is relatively clean — TDS under 500 ppm — but summer irrigation demand and Texas heat still push chemistry around. For pool pump replacement that's mostly good news — the failures we see in Pecan Square are heat-cycle and chemistry-drift related rather than mineral, so they're more predictable and cheaper to stay ahead of. Most Pecan Square pools are plaster or pebble — finishes that show staining fast if chemistry slips.
Do you charge for the diagnostic visit even if I don't book the repair?
Yes — there's a flat diagnostic charge that we quote on the call before we send a tech. We waive it if you book the repair on the same visit. The diagnostic includes a written estimate so you can compare or get a second opinion before any work starts. We don't publish a fixed repair price online because every job is genuinely different — but you'll never get a surprise number.
Are you licensed and insured for pool work in Pecan Square?
Yes — we carry full general liability + workers' comp, and our techs are trained on every major brand (Pentair, Hayward, Jandy, Sta-Rite). We're a real local business in Argyle serving Pecan Square (76247), not a referral marketplace that sells your details to whoever answers first.
Do you bring parts on the first visit, or do I wait for a second visit for the repair?
We stock the most-common parts on every truck — pump seals, basket lids, cartridges, sand, filter o-rings, ignition components, salt-cell test kits. About 70% of repairs in Pecan Square finish on the first visit. The other 30% need a part order; we book the return for the next available slot, usually within 48 hours.
Do I have to switch to a variable-speed pump when my old pump fails?
Current Department of Energy regulations require dedicated-purpose pool pumps above approximately one total horsepower to meet strict energy-efficiency ratings. Variable-speed pumps satisfy these standards and allow you to dial in lower RPMs for baseline filtration, which cuts daily wattage draw.
Can the new pump hook directly into my existing plumbing?
Pumps rarely share identical inlet and outlet heights across different models or generations. We cut out warped or undersized pipe and install fresh schedule 40 PVC with high-temperature unions so the new pump sits level without putting mechanical stress on the plumbing.
Will a new variable-speed pump work with my older automation system?
Most modern variable-speed pumps communicate with digital automation boards through an RS-485 connection. If your automation board does not support communication with the chosen pump line, we wire the pump to constant power and set its schedules directly through the pump onboard interface.

Pecan Square pool pump replacement — call (469) 455-1054

Family-owned in Argyle. Real techs, real same-day service when we have parts on the truck.

Book online(469) 455-1054

Free checklist

The DFW month-by-month pool checklist

What it covers (12 months · 76 tasks · 12 marked critical):

  • Freeze nights (January and December): keep the pump running, and what to drain if the power goes out
  • The March opening: test everything, brush, shock, then balance alkalinity, pH and calcium
  • Summer: testing two or three times a week, the weekly shock, and what to do after rain or a party
  • Fall leaves, and easing the chemistry down for winter
Read it now — no email needed →

Email me the checklist

One email with a link to the printable checklist — print it, or save it as a PDF, from that page. That is all we send: no mailing list.

Retail Store

Visit Us Today

Stop by for free water testing, expert advice, and professional-grade supplies.

Simplified Pools

1611 Commons Cir Suite 100, Northlake, TX 76226
Northlake, TX 76226

Get Directions →
Call Now
Book Service