Your cart

Your cart is empty

Poolife Endure Water Conditioner is designed to significantly enhance your swimming experience by making the pool water softer and more pleasant. This product goes beyond just softening the water; it also plays a key role in clarifying the water, resulting in a crystal-clear appearance that is inviting for swimmers. It effectively improves water clarity as well as the efficiency of the filtration system, ensuring a better pool environment overall.

~ Transforms your pool into a haven of softer, more soothing water, ensuring uninterrupted fun and enjoyment.

~ Enhances filtration efficiency for clearer, more sparkling pool water.

~ Fully compatible with all types of pool sanitizers.

Dosage:

Add 2 lbs per 1,000 gallons of pool water.

Directions:

1. Firstly, ensure your pool is sanitized using either bromine, chlorine, or biguanide (PHMB), and then proceed to backwash and clean the filter.

2. Next, balance your pool water, making sure to adjust the pH to a range of 7.2 - 7.6. Distribute the recommended dose of this product evenly over the pool's surface while the pump is running, following these specific steps:

A. Divide the initial treatment into three equal doses, adding one-third of the total amount required during each application.

B. If any product remains undissolved at the bottom of the pool, brush it to help it dissolve.

C. Expect the pH to rise as a normal response to adding this product. One hour after each addition, adjust the pH back to the 7.2 - 7.6 range using a pH decreaser, following the instructions on the label.

D. Allow a minimum of 8 hours between each application of this product. Refrain from adding any additional products until the pH stabilizes within the 7.2 - 7.6 range. Note that for every 2 lbs of this product used, you may need approximately 1 lb of pH decreaser for the adjustment.

~ Finally, within 10 days, take a water sample to your dealer for a balance check and to confirm whether a sufficient amount of the product has been added.

 

Poolife® Endure® Water Conditioner

SKU: 62053
Regular price $61.99
Unit price
per 

Have questions? Contact us 469-455-1054

Poolife Endure Water Conditioner is designed to significantly enhance your swimming experience by making the pool water softer and more pleasant. This product goes beyond just softening the water; it also plays a key role in clarifying the water, resulting in a crystal-clear appearance that is inviting for swimmers. It effectively improves water clarity as well as the efficiency of the filtration system, ensuring a better pool environment overall.

~ Transforms your pool into a haven of softer, more soothing water, ensuring uninterrupted fun and enjoyment.

~ Enhances filtration efficiency for clearer, more sparkling pool water.

~ Fully compatible with all types of pool sanitizers.

Dosage:

Add 2 lbs per 1,000 gallons of pool water.

Directions:

1. Firstly, ensure your pool is sanitized using either bromine, chlorine, or biguanide (PHMB), and then proceed to backwash and clean the filter.

2. Next, balance your pool water, making sure to adjust the pH to a range of 7.2 - 7.6. Distribute the recommended dose of this product evenly over the pool's surface while the pump is running, following these specific steps:

A. Divide the initial treatment into three equal doses, adding one-third of the total amount required during each application.

B. If any product remains undissolved at the bottom of the pool, brush it to help it dissolve.

C. Expect the pH to rise as a normal response to adding this product. One hour after each addition, adjust the pH back to the 7.2 - 7.6 range using a pH decreaser, following the instructions on the label.

D. Allow a minimum of 8 hours between each application of this product. Refrain from adding any additional products until the pH stabilizes within the 7.2 - 7.6 range. Note that for every 2 lbs of this product used, you may need approximately 1 lb of pH decreaser for the adjustment.

~ Finally, within 10 days, take a water sample to your dealer for a balance check and to confirm whether a sufficient amount of the product has been added.