Skip to content
Sold todaySingle-speed

Jandy PlusHP (single-speed)

High head in a mid-size body. Only the small sizes are still made; Jandy names the VS PlusHP as the replacement for the rest.

0.95 THP (PHPF.50 / PHPM.75) · 208-230/115V · single-speed

What we repair on the Jandy PlusHP (single-speed)

An induction motor with a start capacitor. The capacitor, the seal and the bearings are the usual failures — all repairable on the spot when the part is on the truck.

  • Hums but will not start — usually the start capacitor, sometimes a seized shaft
  • Trips the breaker or overheats — motor windings, wiring, or a failing bearing
  • Leaking at the shaft seal (water under the motor) — a new mechanical seal before the bearings rust
  • Air in the basket and losing prime — lid o-ring, basket, drain plugs, suction-side unions
  • Loud grinding or screeching — worn motor bearings
  • Low flow — impeller clogged or worn, diffuser gasket, basket
  • Cracked strainer housing, lid or basket

From Jandy's manual

  • Two-speed PlusHP pumps are not rated for 208 V.

The facts, from Jandy

Type
Single-speed
For
In-ground pools
Ratings
0.95 THP (PHPF.50 / PHPM.75)
Voltage
208-230/115V
Maximum flow
— not stated by the manufacturer
Controls
  • None on the pump
  • Large strainer basket
  • Tool-free drain plugs, cam-lock lid
Model numberWhat it is
PHPF.50 / PHPM.75Still sold, 0.95 THP (F = full-rated, M = max-rated)
PHPF.75–2.0 / PHPM1.0–2.5Stopped by July 18, 2021

If it is time to replace it

Repair first when it makes sense. When the housing is cracked, the motor is failing on an old single-speed, or the parts are no longer made, these are the pumps to look at:

Why a replacement pump is almost always variable-speed now

  • Since July 19, 2021, new pool filter pumps have had to meet a federal Department of Energy efficiency standard. For the common in-ground size — a single-phase, self-priming pump of about 1.15 motor horsepower (0.711 hydraulic horsepower) or more — DOE says that standard would likely require a variable-speed motor. (10 CFR 431.465)
  • Since September 29, 2025, new pool pump motors from 1.15 to 5 total horsepower must be variable-speed — including a motor sold on its own to replace a failed one. Once older stock is gone, a worn-out single-speed motor of that size is replaced with a variable-speed one, not another single-speed. (10 CFR 431.485)
  • Smaller pool pump motors (0.5 to under 1.15 total horsepower) must be variable-speed when made on or after September 28, 2027; DOE has said it will not seek penalties on those small motors made before March 26, 2029. (DOE enforcement policy, April 2026)
  • ENERGY STAR still certifies pool pumps; EPA says certified in-ground models use about 20% less energy than standard ones. (ENERGY STAR pool pumps)

Where these facts come from

Checked against Jandy's own pages on 2026-09-23. Manufacturers change their lineups — if something here no longer matches, the manufacturer's page is right and we will fix ours.

← Every pump we repair · Jandy repair near me

Free PDF Guide

Get Our Local DFW Pool Maintenance Checklist

Stop guessing. Download the exact month-by-month checklist our certified technicians use to keep Texas pools crystal clear year-round.

Value: $49

Where should we send it?

We respect your privacy. No spam.

Retail Store

Visit Us Today

Stop by for free water testing, expert advice, and professional-grade supplies.

Simplified Pools

1611 Commons Cir Suite 100, Northlake, TX 76226
Northlake, TX 76226

Get Directions →
Call Now
Book Service