Skip to content
SIMPLIFIEDPOOLS

Highland Village, TX · 75077

Pool Light Replacement in Highland Village, TX

Diagnostic and replacement for incandescent and LED pool lights, niche fixtures, and junction box wiring. Most cord pulls and fixture swaps finish in a single visit without draining your pool.

⚡ Same-day when parts on truck
Book online →Call (469) 455-1054

What our pool light replacement covers in Highland Village

Diagnostic and replacement service for failed underwater pool and spa fixtures across line-voltage (120V) and low-voltage (12V) systems. Our technicians pull new cord through existing conduit back to the deck junction box, replace worn silicone or rubber lens gaskets, and test safety breakers before putting the light back into service.

  • ✓Pentair MicroBrite® 12V color LED fixtures and 1.5-inch nicheless wall fittings
  • ✓Amerlite 120V incandescent fixtures, 500 W pool flood light bulbs, and 8 3/8" lens gaskets
  • ✓Pentair IntelliBrite 5g color and white LED fixtures, including Uni-Tension wire clamp assemblies
  • ✓Hayward ColorLogic and Universal CrystaLogic 12V and 120V LED pool and spa fixtures
  • ✓Jandy WaterColors LED fixtures and niche adapters
  • ✓120V stainless RGBW LED fixtures with 50-foot and 100-foot cord runs
  • ✓Pool deck junction box wiring, 120V-to-12V step-down transformers, and GFCI breaker diagnostics

What we don't do (just so you know)

  • • Underground conduit collapses or severed pipes requiring concrete deck saw-cutting without a separate excavation scope
  • • Panel-level electrical repairs back at the main house breaker panel
  • • Filing factory warranty claims on your behalf — we document the failure so you can submit directly to the manufacturer

Common pool light replacement symptoms we see in Highland Village

Light trips the GFCI breaker immediately when turned onWater visible behind the lens glass or inside the sealed light casingLED light stuck on one color or failing to cycle through modesLight fixture flickers, dims, or will not illuminateLight cord deteriorated or glued into conduit by calcification

If you're seeing any of these, call (469) 455-1054 — most are diagnosable in one visit.

About pool light replacement in Highland Village, TX

Highland Village consistently ranks among the best places to live in DFW and all of Texas, known for excellent Lewisville ISD schools, safe neighborhoods, strong property values, and an engaged community culture. Nestled between Lewisville Lake and the Flower Mound community, Highland Village offers a premium suburban lifestyle that attracts families who invest significantly in their homes and outdoor living spaces. The high density of residential pools here reflects the community's emphasis on outdoor entertainment and family recreation. Most Highland Village neighborhoods were built in the 1990s and 2000s, meaning many pools are 15-25 years old — an age where equipment optimization and surface refinishing become important considerations. The municipal water system provides good quality water from the DFW system, making chemical management relatively straightforward compared to well-water communities. Highland Village homeowners are discerning customers who research service providers carefully, value consistency and communication, and expect their pool to look perfect for neighborhood gatherings and family events. Our commitment to detailed service reports, transparent pricing, and reliable scheduling resonates strongly with the Highland Village community. Located just 8 miles from our Northlake headquarters, Highland Village is one of our most efficient service areas with multiple weekly routes covering every neighborhood.

Highland Village water profile

Highland Village is served by the City of Highland Village municipal water system, receiving treated water from the DFW Water supply. Water quality is good with moderate mineral content (250-350 ppm TDS) and reasonable calcium hardness (200-300 ppm). The water is consistent year-round and relatively easy to manage chemically. Primary maintenance focus is on equipment condition and optimization rather than fighting challenging water chemistry.

Highland Village pool & equipment mix

Highland Village pools are predominantly established installations from the 1990s-2000s housing boom. Most feature plaster or pebble finishes with sand or cartridge filtration. Many pools still have original single-speed pumps that are excellent candidates for variable-speed upgrades. Newer renovations in the area increasingly include salt chlorine generators, LED lighting, and automation systems. Pool sizes typically range from 12,000 to 30,000 gallons, with some properties featuring resort-style installations with spas and water features.

Neighborhoods we serve in Highland Village

The HighlandsHighland ShoresSellmeyer EstatesHighland MeadowsThe WoodsLakewood HillsHighland Village Estates

Working pool light replacement jobs near…

The Shops at Highland VillageLewisville LakeDoubletree Ranch ParkHighland Village City HallBriarhill Middle SchoolLewisville ISD Schools
"Our Highland Village pool was built in 2003 and needed some updating. Simplified Pools not only handles our weekly maintenance perfectly, but they helped us upgrade to a variable-speed pump that cut our electric bill significantly. Honest, knowledgeable, and always on time."
— Karen & Steve L., Highland Village Residents

Other things we handle in Highland Village

Service

Pool Automation Repair

Service

Pool Repair

Service

Pool Leak Detection

Service

Pool Equipment Upgrades

Highland Village pool light replacement questions

How fast can you get to my Highland Village pool for pool light replacement?
Same-day visits are common in Highland Village when we have parts on the truck — call (469) 455-1054 before 11 AM and we usually have someone out the same afternoon. We run daily routes through Denton County, including Flower Mound and Lewisville, so windshield time is rarely what holds a Highland Village job up. After hours, next morning at the latest.
Does Highland Village water affect pool light replacement?
Highland Village is on municipal water (typically Upper Trinity Water District or DCUD), which is relatively clean — TDS under 500 ppm — but summer irrigation demand and Texas heat still push chemistry around. For pool light replacement that's mostly good news — the failures we see in Highland Village are heat-cycle and chemistry-drift related rather than mineral, so they're more predictable and cheaper to stay ahead of. Many Highland Village pools run salt chlorine generators, which changes how we dose the other chemicals.
Do you charge for the diagnostic visit even if I don't book the repair?
Yes — there's a flat diagnostic charge that we quote on the call before we send a tech. We waive it if you book the repair on the same visit. The diagnostic includes a written estimate so you can compare or get a second opinion before any work starts. We don't publish a fixed repair price online because every job is genuinely different — but you'll never get a surprise number.
Are you licensed and insured for pool work in Highland Village?
Yes — we carry full general liability + workers' comp, and our techs are trained on every major brand (Pentair, Hayward, Jandy, Sta-Rite). We're a real local business in Argyle serving Highland Village (75077), not a referral marketplace that sells your details to whoever answers first.
Do you bring parts on the first visit, or do I wait for a second visit for the repair?
We stock the most-common parts on every truck — pump seals, basket lids, cartridges, sand, filter o-rings, ignition components, salt-cell test kits. About 70% of repairs in Highland Village finish on the first visit. The other 30% need a part order; we book the return for the next available slot, usually within 48 hours.
Do you need to drain the pool to replace the light?
No. Standard pool niches have several feet of cord coiled behind the fixture so it unhooks and rests on the deck for bulb and gasket swaps. For full fixture replacements, we secure the new cord to the old run and pull it through the conduit directly to the deck junction box with the pool full.
Why does the pool light trip the GFCI breaker?
Water intrusion is the most common cause. When moisture breaches a degraded lens gasket or a cracked cord jacket, current leaks to ground and trips the GFCI. Failing GFCI breakers or loose wiring inside the deck junction box can also trigger nuisance trips.
Can an old incandescent pool light be converted to LED?
Yes. If the niche and fixture ring are sound, you can swap the 500W incandescent bulb for an LED bulb and a fresh gasket. If the fixture is corroded, we pull a dedicated low-voltage or line-voltage LED fixture through the existing conduit to improve efficiency and avoid bulb seals entirely.

Highland Village pool light replacement — call (469) 455-1054

Family-owned in Argyle. Real techs, real same-day service when we have parts on the truck.

Book online(469) 455-1054

Free checklist

The DFW month-by-month pool checklist

What it covers (12 months · 76 tasks · 12 marked critical):

  • Freeze nights (January and December): keep the pump running, and what to drain if the power goes out
  • The March opening: test everything, brush, shock, then balance alkalinity, pH and calcium
  • Summer: testing two or three times a week, the weekly shock, and what to do after rain or a party
  • Fall leaves, and easing the chemistry down for winter
Read it now — no email needed →

Email me the checklist

One email with a link to the printable checklist — print it, or save it as a PDF, from that page. That is all we send: no mailing list.

Retail Store

Visit Us Today

Stop by for free water testing, expert advice, and professional-grade supplies.

Simplified Pools

1611 Commons Cir Suite 100, Northlake, TX 76226
Northlake, TX 76226

Get Directions →
Call Now
Book Service