Skip to content
SIMPLIFIEDPOOLS

Lantana, TX · 76226

High CYA Pool Remediation in Lantana, TX

Cyanuric acid above the 30–50 ppm range slows chlorine activity and allows algae to spread. We measure stabilizer levels with professional reagents, calculate the staged water exchange required, and restore proper sanitizer balance. Contact our team to book service or request a quote.

Book online →Call (469) 455-1054

What our high CYA pool correction covers in Lantana

Diagnostic and water exchange service for pools with elevated cyanuric acid that suppresses active chlorine. Our technicians measure exact stabilizer levels with professional test kits, calculate safe partial drain volumes, and rebalance all baseline parameters after refill. Contact us to schedule an on-site evaluation.

  • ✓Stabilizer turbidity testing using Taylor Complete High Professional Test Kits (K-2005C series)
  • ✓Evaluation of active free chlorine to CYA ratios to determine required sanitizing levels
  • ✓Calculated partial drain-and-refill schedules based on total pool gallonage to reach 30–50 ppm CYA
  • ✓Submersible pump setup and monitored water evacuation to protect pool shell integrity
  • ✓Post-fill chemistry rebalancing: pH (7.2–7.6), total alkalinity (80–120 ppm), and calcium hardness (200–400 ppm)
  • ✓Feeder inspection and sanitation plan review to halt cumulative stabilizer accumulation

What we don't do (just so you know)

  • • Complete dry-draining of pool shells; water evacuation is performed in stages to protect structural integrity
  • • Chemical additive treatments for stabilizer removal, as physical water replacement is the only practical method to lower CYA
  • • Municipal water utility charges for pool refilling

Common high CYA pool correction symptoms we see in Lantana

Algae returns within days despite regular shock treatments and tablet usageFree chlorine reads zero or near-zero on test strips despite continuous feeder operationCYA black dot vanishes near the top mark of the test tube (levels exceeding 100 ppm)Cloudy water that will not clear with standard filtration and routine chlorinationInadequate sanitizing speeds caused by a high CYA-to-free-chlorine ratio

If you're seeing any of these, call (469) 455-1054 — most are diagnosable in one visit.

About high CYA pool correction in Lantana, TX

Lantana is a nationally recognized master-planned community spanning portions of Bartonville, Copper Canyon, and unincorporated Denton County. Developed starting in the 2000s, Lantana has grown into one of the most desirable residential communities in DFW North, featuring beautiful homes, excellent amenities (multiple pools, fitness center, parks, trails), and a strong community culture. The community includes the Lantana Golf Club and numerous neighborhood parks and gathering spaces. What sets Lantana apart for pool service is the high concentration of well-maintained, modern pools with quality equipment. Most homes were built between 2005 and 2020, featuring contemporary pool designs with automated equipment, salt chlorine generators, and thoughtful landscaping. The community's HOA standards ensure properties are well-maintained, and homeowners typically invest in quality pool care that matches their home's presentation. Located just 5 miles from our Northlake headquarters, Lantana is one of our most convenient service areas. Many of our team members live in or near Lantana and understand the community intimately.

Lantana water profile

Lantana is served by the Bartonville Water Supply Corporation and Denton County Fresh Water Supply District, providing municipal-quality water with moderate mineral content (300-400 ppm TDS). Water chemistry is consistent and well-suited for pool maintenance, particularly for the salt chlorine generators common in the community. Some western portions of Lantana may have slightly higher mineral content depending on the specific water supply district.

Lantana pool & equipment mix

Lantana pools are predominantly modern residential installations from 2005-2020. Most feature quality plaster or pebble finishes, cartridge filtration, variable-speed or dual-speed pumps, and salt chlorine generators. LED lighting and basic automation are common. Many homes feature integrated pool and spa designs with water features. Pool sizes typically range from 12,000 to 30,000 gallons. The consistent build quality across the community means our technicians know the common equipment configurations and can service them efficiently.

Neighborhoods we serve in Lantana

Lantana SouthLantana NorthLantana BartonvilleSandstoneLarkspurCascadesLantana Golf Club Area

Working high CYA pool correction jobs near…

Lantana Golf ClubLantana Community Amenity CentersLantana Trail SystemAdkins ElementaryLantana Town CenterE.P. Rayzor Elementary
"Living in Lantana, we love having Simplified Pools' store just down the road in Northlake. They handle our weekly service and whenever we need supplies, it's a quick trip. The team knows Lantana pools well — they service several of our neighbors too."
— Rachel & Dan K., Lantana Homeowners

Other things we handle in Lantana

Service

Green Pool Recovery

From $300

Service

Pool Algae Treatment

From $180

Service

Weekly Pool Service

From $165

Service

Pool Filter Repair

Pool chemicals

Liquid Test Kits

Same-day delivery in Lantana

Pool chemicals

Chlorine Tablets

Same-day delivery in Lantana

Lantana high CYA pool correction questions

How fast can you get to my Lantana pool for high CYA pool correction?
Our usual Lantana response time is 24-48 hours after the first call, and we're already routing through Denton County most days. Diagnostic visits are scheduled within 1-2 business days.
Does Lantana water affect high CYA pool correction?
Lantana is on municipal water (typically Upper Trinity Water District or DCUD), which is relatively clean — TDS under 500 ppm — but summer irrigation demand and Texas heat still push chemistry around. For high CYA pool correction that's mostly good news — the failures we see in Lantana are heat-cycle and chemistry-drift related rather than mineral, so they're more predictable and cheaper to stay ahead of. Many Lantana pools run salt chlorine generators, which changes how we dose the other chemicals.
Do you charge for the diagnostic visit even if I don't book the repair?
Yes — there's a flat diagnostic charge that we quote on the call before we send a tech. We waive it if you book the repair on the same visit. The diagnostic includes a written estimate so you can compare or get a second opinion before any work starts. We don't publish a fixed repair price online because every job is genuinely different — but you'll never get a surprise number.
Are you licensed and insured for pool work in Lantana?
Yes — we carry full general liability + workers' comp, and our techs are trained on every major brand (Pentair, Hayward, Jandy, Sta-Rite). We're a real local business in Argyle serving Lantana (76226), not a referral marketplace that sells your details to whoever answers first.
Do you bring parts on the first visit, or do I wait for a second visit for the repair?
We stock the most-common parts on every truck — pump seals, basket lids, cartridges, sand, filter o-rings, ignition components, salt-cell test kits. About 70% of repairs in Lantana finish on the first visit. The other 30% need a part order; we book the return for the next available slot, usually within 48 hours.
What does high CYA do in a pool?
Cyanuric acid holds free chlorine in reserve to protect it from degradation by sunlight, but high stabilizer slows down sanitizing activity. Above the ideal 30–50 ppm range, the pool requires much higher free chlorine concentrations (at least 7.5% of the CYA level) to prevent algae and sanitize water.
What is the correct cyanuric acid level for a swimming pool?
The target cyanuric acid level is 30–50 ppm. When stabilizer exceeds this range, chlorine binds too strongly, requiring significantly elevated free chlorine levels to maintain clean, safe water.
Why did my CYA get so high?
Standard trichlor tablets and granular dichlor shock continuously add stabilizer alongside chlorine. Trichlor adds about 6 ppm CYA per 10 ppm free chlorine, while dichlor adds about 9 ppm CYA per 10 ppm free chlorine. Because cyanuric acid does not evaporate, routine tablet and shock use causes it to accumulate over time.
Can high CYA be lowered without draining pool water?
No chemical product reliably breaks down or removes cyanuric acid in field conditions. A calculated, staged drain-and-refill with fresh water is the only reliable method to bring stabilizer back into the 30–50 ppm range.

Lantana high CYA pool correction — call (469) 455-1054

Family-owned in Argyle. Real techs, real same-day service when we have parts on the truck.

Book online(469) 455-1054

Free checklist

The DFW month-by-month pool checklist

What it covers (12 months · 76 tasks · 12 marked critical):

  • Freeze nights (January and December): keep the pump running, and what to drain if the power goes out
  • The March opening: test everything, brush, shock, then balance alkalinity, pH and calcium
  • Summer: testing two or three times a week, the weekly shock, and what to do after rain or a party
  • Fall leaves, and easing the chemistry down for winter
Read it now — no email needed →

Email me the checklist

One email with a link to the printable checklist — print it, or save it as a PDF, from that page. That is all we send: no mailing list.

Retail Store

Visit Us Today

Stop by for free water testing, expert advice, and professional-grade supplies.

Simplified Pools

1611 Commons Cir Suite 100, Northlake, TX 76226
Northlake, TX 76226

Get Directions →
Call Now
Book Service