Skip to content

Krum, TX · 76249

Pool Heater Repair in Krum, TX

Gas heaters, heat pumps, automation-controlled — when the pool isn't heating, we trace the failure from gas valve to flame sensor to thermostat in one visit.

⚡ Same-day when parts on truck

What our heater repair covers in Krum

Diagnostic + repair on every major DFW pool-heater brand: Pentair MasterTemp, Hayward H-Series, Raypak, Jandy. Gas-fired + heat-pump models.

  • ✓Ignition control, hot-surface igniter, flame sensor
  • ✓Gas valve replacement
  • ✓Pressure switch + flow-switch issues
  • ✓Heat exchanger inspection + repair
  • ✓Thermostat + control-board replacement
  • ✓Heat-pump compressor + fan diagnosis

What we don't do (just so you know)

  • • We don't run new gas line — call a licensed gas plumber for that
  • • Major heat-pump refrigerant work (we'll diagnose and refer to a HVAC partner)

Common heater repair problems in Krum

Tap the one you’re seeing to book a visit — most are found and fixed in one trip.

Know which one you have

Gas heater or heat pump?

Gas heater

Runs on
Natural gas or propane
Heats
Fast — hours
Cold weather
Works in any weather
What we fix
Igniter, flame sensor, pressure switch, gas valve, board

Heat pump

Runs on
Electricity
Heats
Slowly and steadily
Cold weather
Loses output as the air gets colder
What we fix
Flow, sensors, fan and compressor diagnosis — major refrigerant work goes to an HVAC partner

About heater repair in Krum, TX

Krum embodies authentic small-town Texas living with a strong sense of community and family values that have deep roots in Denton County history. Located north of Lewisville, Krum maintains its rural character while experiencing thoughtful growth—new residential communities are being developed to serve growing families while long-established ranches and older residential properties remain central to the community's identity. The small-town feel creates a culture where neighbors know neighbors, local businesses are valued, and service providers are expected to demonstrate genuine commitment to the community rather than transient interest. Krum families choosing pool ownership often do so on larger properties with wells serving individual homes rather than municipal water systems. This unique water situation—characterized by elevated mineral content and hardness typical of Denton County wells—requires sophisticated understanding and specialized treatment protocols that many generic pool service companies lack. Our expertise with Krum's specific well water challenges, combined with genuine investment in serving this rural community, has made Simplified Pools the provider of choice for Krum homeowners. Whether managing pools on 1-acre residential lots or larger ranch properties, our team brings rural property knowledge and well water expertise that truly makes a difference in maintaining crystal clear pools despite challenging groundwater chemistry.

Krum water profile

Krum is characterized predominantly by well water systems, with mineral content often exceeding 800-1200 ppm TDS depending on well location and depth. Groundwater contains elevated calcium (300+ ppm), iron (0.5-2.0 ppm), and sometimes sulfates creating persistent scaling and staining challenges. Water hardness requires aggressive treatment with sequestrants, chelating agents, and possibly saturation index management to prevent surface damage. The water chemistry is among the most challenging in our service area, requiring experienced technicians who understand well water treatment protocols deeply. Many Krum property owners have struggled with service providers unfamiliar with well water, making our expertise a significant differentiator.

Krum pool & equipment mix

Krum pools primarily feature classic installations on larger properties reflecting rural and estate-style living. Most contain plaster finishes with sand filters and single to dual-speed pump configurations. Equipment tends to be older and requires more frequent maintenance due to well water corrosivity and mineral scaling. Some properties feature large recreational pools (25,000-50,000+ gallons) reflecting acreage and recreation-focused property designs. A growing number of newer property acquisitions are updating pools with modern equipment and salt systems better suited to managing the challenging well water.

Neighborhoods we serve in Krum

Krum ProperKrum Estate PropertiesNorthgateLakeside EstatesRolling Hills

Working heater repair jobs near…

Krum High SchoolKrum Heritage MuseumKrum City ParkLake Ray Roberts (nearby)Clear Creek Natural Heritage Center
"Out here in Krum, we've got well water that's basically rust-colored if you don't know what you're doing. Simplified Pools gets it. They treat our water properly, keep equipment from corroding, and never try to oversell us on stuff we don't need. That's rare out here."
— Tom H., Krum Ranch Owner

How a repair visit goes

  1. Step 1

    Book or call

    Pick a day online, or call and tell us what the pad is doing.

  2. Step 2

    We find the cause

    A flat $125 diagnostic — waived when we do the repair that visit.

  3. Step 3

    You approve the price

    You see the fix and the price before any work starts.

  4. Step 4

    Fixed and tested

    Common parts ride on the truck, so most jobs finish the same visit.

Who shows up

Our own technicians

  • Parts on the truck

    Same-day when we carry your part.

  • Licensed and insured

    And the repair work is warrantied.

  • Every major brand

    Pentair, Hayward, Jandy, Sta-Rite and more.

Krum heater repair questions

What's the most common pool heater failure on Krum pools?
In Krum, the order is consistent: ignition controls and flame sensors first (heaters that sat unused over summer fail at first cold-snap fire-up), pressure switches second (often a flow-side problem masquerading as a heater problem), and gas valves third. On Krum well water, we also see heat-exchanger scale shorten heater life by 2-3 seasons — if your heater is over 8 years old and on well water, schedule a descale inspection before the next freeze.
Why won't my Krum pool heat past 75°F?
Usually it's not the heater — it's the run-time math. Denton County pools lose 4-6°F overnight in spring and fall, so a properly-sized heater on a properly-sized pump still needs 6-10 hours of run time to climb from a cold start. We see this most on heat pumps in Krum (where calcium buildup further reduces transfer). The fix usually isn't a new heater — it's verifying ambient temp + flow rate + filter cleanliness + heat output, then re-tuning the schedule. If after that the math says you ARE undersized, we'll quote a right-sized replacement.
Do you bring heater parts on the first visit to Krum?
For Pentair MasterTemp, Hayward H-Series, and Raypak — yes, we stock hot-surface igniters, flame sensors, pressure switches, and gas valves on every Krum (76249) truck. Roughly 65% of heater calls in Denton County close on the first visit. Heat-pump compressor / reversing-valve work or obsolete-model parts may need a 24-48 hour return.

Krum heater repair — call (469) 455-1054

Family-owned in Argyle. Real techs, real same-day service when we have parts on the truck.

Free checklist

The DFW month-by-month pool checklist

What it covers (12 months · 76 tasks · 12 marked critical):

  • Freeze nights (January and December): keep the pump running, and what to drain if the power goes out
  • The March opening: test everything, brush, shock, then balance alkalinity, pH and calcium
  • Summer: testing two or three times a week, the weekly shock, and what to do after rain or a party
  • Fall leaves, and easing the chemistry down for winter
Read it now — no email needed →

Email me the checklist

One email with a link to the printable checklist — print it, or save it as a PDF, from that page. That is all we send: no mailing list.

Retail Store

Visit Us Today

Stop by for free water testing, expert advice, and professional-grade supplies.

Simplified Pools

1611 Commons Cir Suite 100, Northlake, TX 76226
Northlake, TX 76226

Get Directions →
Call Now
Book Service