Hayward MaxFlo VS 500
PumpModel: W3SP2303VSP
Variable-speed pump, 1.65 THP, 230V. Energy Star certified. Built-in timer with 8 programmable speed settings. Rotatable keypad.
Specifications
| hp | 1.65 THP |
| voltage | 230V |
| flow rate | 90 GPM max |
| energy star | Yes |
Common Replacement Parts
| Part Number | Name | Category | Notes | Shop |
|---|---|---|---|---|
| SPX3200Z1 | Shaft Seal Assembly | seal | Replace if pump is leaking at base. Common failure point. | Search in Shop |
| SPX3200UNKIT | Union Connector Kit | fitting | 2" x 2.5" union kit for intake and discharge. | Search in Shop |
| SPX2600Z2 | Diffuser Gasket | gasket | Replace when rebuilding pump. Check for cracks. | Search in Shop |
| SPX3200M | Motor (1.65 THP VS) | motor | Complete VS motor replacement. Requires reprogramming after install. | Search in Shop |
| SPX3000LA | Strainer Basket | basket | Standard trap basket. Check for cracks monthly. | Search in Shop |
| SPX3000T | Strainer Cover | lid | Clear lid. Replace if cracked or yellowed (UV damage). | Search in Shop |
| SPX3000S | Strainer Cover O-Ring | o-ring | Lube with silicone every filter clean. Replace if flat or cracked. | Search in Shop |
Troubleshooting
Pump won't prime
Possible Causes
- Air leak at strainer lid o-ring
- Clogged impeller
- Low water level
How to Fix
Check/replace lid o-ring (SPX3000S). Clean impeller. Verify water level above skimmer.
Loud screeching noise
Possible Causes
- Bad bearings in motor
- Shaft seal failure
How to Fix
Replace motor (SPX3200M) or shaft seal (SPX3200Z1). Do not run dry.
Error code E06
Possible Causes
- Overheating
- Blocked intake
How to Fix
Check for flow restriction. Clean baskets. Ensure adequate ventilation around motor.
Schematic Available
Exploded parts diagram for the Hayward MaxFlo VS 500
Need this part?
Call (469) 455-1054 or chat with our AI assistant for instant help finding the right part, checking availability, or scheduling an installation.