Skip to content

Cross Roads, TX · 76227

Pool Acid Wash in Cross Roads, TX

Stripping a microscopic layer of plaster or pebble to remove embedded mineral scale, copper stains, and dead algae roots. Drained, washed, neutralized, and prepped for refill in a single service window.

What our acid wash covers in Cross Roads

A full physical and chemical surface stripping procedure for gunite, plaster, and pebble pools. We drain the pool, apply a balanced dilution of commercial muriatic acid to remove stained surface cement, neutralize the runoff with soda ash to protect plumbing, and rinse the shell thoroughly before starting the refill.

  • ✓Submersible pump setup and controlled pool draining with hydrostatic relief valve monitoring
  • ✓Manual application of diluted HASA muriatic acid across floor and walls
  • ✓Specialized scrubbing of calcium scale deposits along the tile line and steps
  • ✓Neutralization of acid slurry in the bowl using soda ash before pumping out
  • ✓Targeted treatment of deep black algae spore sites embedded in plaster pores
  • ✓PebbleTec and exposed aggregate brightening without aggregate dislodgement
  • ✓Localized spot treatments using specialized underwater acid wash equipment when full draining is not indicated
  • ✓Initial fill-water testing and start-up chemical balancing plan once the pool is filled

What we don't do (just so you know)

  • • Vinyl liner and fiberglass pools — acid washing will dissolve or bleach these surfaces
  • • Structural plaster failures, delamination, hollow spots, or gunite showing through worn plaster
  • • Subsurface soil stains migrating through porous gunite from the exterior of the shell

Common acid wash symptoms we see in Cross Roads

Plaster looks yellow, brown, or mottled even after chlorine shockRough, sandpaper-like calcium carbonate scale along walls and floorBlue-green or black metal stains caused by dissolved copper or ironStubborn black algae heads returning in the exact same spots every summerDull, gray pebble aggregate hidden under years of mineral buildupSevere staining left behind after clearing an abandoned swamp-green pool

If you're seeing any of these, call (469) 455-1054 — most are diagnosable in one visit.

About acid wash in Cross Roads, TX

Cross Roads is a small but rapidly growing community in Denton County, located along US 380 between Aubrey and Denton. The area has experienced significant residential growth as families seek the space and rural character that larger cities can't offer, while still maintaining access to DFW amenities via I-35. Many Cross Roads properties sit on larger lots, reflecting the community's semi-rural character with new development bringing modern subdivisions alongside established ranch-style properties. The mix of new construction and established homes creates diverse pool service needs — newer pools with modern equipment alongside older installations that benefit from our diagnostic and upgrade expertise. Like many rural Denton County communities, some Cross Roads properties rely on well water systems, requiring the specialized water chemistry knowledge our team brings from years of experience in similar communities like Argyle and Krum. Our Northlake location is approximately 6 miles from most Cross Roads properties, providing quick service access.

Cross Roads water profile

Cross Roads properties use a mix of municipal and well water systems. Municipal water areas have moderate chemistry similar to Denton. Well water properties experience elevated mineral content (600-900 ppm TDS) with higher calcium and iron levels. Our well water expertise from serving Argyle, Krum, and Ponder transfers directly to Cross Roads properties with similar groundwater challenges.

Cross Roads pool & equipment mix

Cross Roads pools range from modern installations in newer subdivisions to established pools on larger ranch-style properties. Newer developments feature plaster and pebble finishes with modern equipment. Established properties may have older equipment needing optimization. Pool sizes range from standard residential (10,000-20,000 gallons) to larger installations on acreage properties.

Neighborhoods we serve in Cross Roads

Paloma CreekSavannah (North)Cross Roads EstatesLa CimaHarvest (North)

Working acid wash jobs near…

US 380 CorridorAubrey ISD SchoolsCross Roads Town CenterLake Ray Roberts (nearby)Lewisville Lake Toll Bridge
"Finding a reliable pool company that serves Cross Roads was tough until we found Simplified Pools. They understand our well water and keep our pool looking great. Glad to have a quality local option."
— Travis & Lauren H., Cross Roads Homeowners

Cross Roads acid wash questions

How fast can you get to my Cross Roads pool for acid wash?
Our usual Cross Roads response time is 24-48 hours after the first call, and we're already routing through Denton County most days. Diagnostic visits are scheduled within 1-2 business days.
Does Cross Roads water affect acid wash?
Cross Roads is mostly well-water properties — groundwater with elevated calcium (often 600-900 ppm) and iron, which behaves very differently from municipal water. That matters for acid wash specifically: dissolved calcium and iron scale heat exchangers, shorten salt-cell life, and chew through pump seals, so equipment out here tends to need attention sooner than the same gear on city water. We check LSI on every visit rather than treating the symptom twice. Most Cross Roads pools are plaster or pebble — finishes that show staining fast if chemistry slips.
Do you charge for the diagnostic visit even if I don't book the repair?
Yes — there's a flat diagnostic charge that we quote on the call before we send a tech. We waive it if you book the repair on the same visit. The diagnostic includes a written estimate so you can compare or get a second opinion before any work starts. We don't publish a fixed repair price online because every job is genuinely different — but you'll never get a surprise number.
Are you licensed and insured for pool work in Cross Roads?
Yes — we carry full general liability + workers' comp, and our techs are trained on every major brand (Pentair, Hayward, Jandy, Sta-Rite). We're a real local business in Argyle serving Cross Roads (76227), not a referral marketplace that sells your details to whoever answers first.
Do you bring parts on the first visit, or do I wait for a second visit for the repair?
We stock the most-common parts on every truck — pump seals, basket lids, cartridges, sand, filter o-rings, ignition components, salt-cell test kits. About 70% of repairs in Cross Roads finish on the first visit. The other 30% need a part order; we book the return for the next available slot, usually within 48 hours.
How often can a plaster pool be acid washed?
Most traditional white plaster finishes can handle an acid wash every 5 to 7 years. Each treatment removes roughly 1 to 2 millimeters of surface paste, so excessive washing exposes the rough sand and aggregate beneath. Pebble and quartz finishes tolerate the process better because the aggregate itself is impervious to acid.
Will an acid wash fix rough spots or plaster cracks?
No. Acid removes mineral scale and stains, but it does not repair structural cracks or smooth out degraded, pitted plaster. In fact, if the plaster is already thin, an acid wash can make rough patches more noticeable by removing the surrounding smooth cream coat.
What happens to the acid after scrubbing the walls?
The acid collects in the deep end bowl where we neutralize it using soda ash until the pH reaches a neutral 7.0 to 7.4. Once safe and inert, the slurry is pumped out according to local municipal drainage regulations so it does not damage storm drains or pool pumps.
Can I leave the pool empty after the wash to save on water bills?
No. In North Texas clay soils, an empty concrete pool risks floating or shifting from hydrostatic ground pressure, and direct summer sun will crack bare plaster. Refilling begins immediately once the neutralization and rinse-down are finished.

Cross Roads acid wash — call (469) 455-1054

Family-owned in Argyle. Real techs, real same-day service when we have parts on the truck.

Free checklist

The DFW month-by-month pool checklist

What it covers (12 months · 76 tasks · 12 marked critical):

  • Freeze nights (January and December): keep the pump running, and what to drain if the power goes out
  • The March opening: test everything, brush, shock, then balance alkalinity, pH and calcium
  • Summer: testing two or three times a week, the weekly shock, and what to do after rain or a party
  • Fall leaves, and easing the chemistry down for winter
Read it now — no email needed →

Email me the checklist

One email with a link to the printable checklist — print it, or save it as a PDF, from that page. That is all we send: no mailing list.

Retail Store

Visit Us Today

Stop by for free water testing, expert advice, and professional-grade supplies.

Simplified Pools

1611 Commons Cir Suite 100, Northlake, TX 76226
Northlake, TX 76226

Get Directions →
Call Now
Book Service