Skip to content

Canyon Falls, TX · 76226

Pool Acid Wash in Canyon Falls, TX

Stripping a microscopic layer of plaster or pebble to remove embedded mineral scale, copper stains, and dead algae roots. Drained, washed, neutralized, and prepped for refill in a single service window.

What our acid wash covers in Canyon Falls

A full physical and chemical surface stripping procedure for gunite, plaster, and pebble pools. We drain the pool, apply a balanced dilution of commercial muriatic acid to remove stained surface cement, neutralize the runoff with soda ash to protect plumbing, and rinse the shell thoroughly before starting the refill.

  • ✓Submersible pump setup and controlled pool draining with hydrostatic relief valve monitoring
  • ✓Manual application of diluted HASA muriatic acid across floor and walls
  • ✓Specialized scrubbing of calcium scale deposits along the tile line and steps
  • ✓Neutralization of acid slurry in the bowl using soda ash before pumping out
  • ✓Targeted treatment of deep black algae spore sites embedded in plaster pores
  • ✓PebbleTec and exposed aggregate brightening without aggregate dislodgement
  • ✓Localized spot treatments using specialized underwater acid wash equipment when full draining is not indicated
  • ✓Initial fill-water testing and start-up chemical balancing plan once the pool is filled

What we don't do (just so you know)

  • • Vinyl liner and fiberglass pools — acid washing will dissolve or bleach these surfaces
  • • Structural plaster failures, delamination, hollow spots, or gunite showing through worn plaster
  • • Subsurface soil stains migrating through porous gunite from the exterior of the shell

Common acid wash symptoms we see in Canyon Falls

Plaster looks yellow, brown, or mottled even after chlorine shockRough, sandpaper-like calcium carbonate scale along walls and floorBlue-green or black metal stains caused by dissolved copper or ironStubborn black algae heads returning in the exact same spots every summerDull, gray pebble aggregate hidden under years of mineral buildupSevere staining left behind after clearing an abandoned swamp-green pool

If you're seeing any of these, call (469) 455-1054 — most are diagnosable in one visit.

About acid wash in Canyon Falls, TX

Canyon Falls spans across multiple municipalities but maintains a distinct, highly desirable master-planned identity. Known for its rolling terrain, extensive trail system, and affluent homeowner base, this community represents one of our most concentrated service routes. The pools here are almost exclusively modern (post-2015 construction) featuring contemporary pebble finishes, advanced Hayward or Pentair automation systems, and integrated spas or geometric water features. Because many of these homes command premium market values, owners expect zero-defect pool maintenance that protects their investment.

Canyon Falls water profile

Canyon Falls utilizes municipal water that shifts based on the specific address (Argyle, Northlake, or Flower Mound). Generally, the chemistry is consistent and manageable, allowing our techs to focus primarily on equipment optimization and skimming the heavy leaf debris common near the creek trails.

Canyon Falls pool & equipment mix

Modern geometric and freeform pools built after 2015. High density of salt chlorine generators and variable-speed pumps.

Neighborhoods we serve in Canyon Falls

Canyon Falls EastCanyon Falls WestThe ReserveVillage Hub

Working acid wash jobs near…

Canyon Falls ClubGraham Branch CreekPooch ParkHay Barn
"Simplified Pools maintains several pools on our street in Canyon Falls. They actually show up when scheduled, which seems rare these days."
— Jessica W., Canyon Falls

Canyon Falls acid wash questions

How fast can you get to my Canyon Falls pool for acid wash?
Our usual Canyon Falls response time is 24-48 hours after the first call, and we're already routing through Denton County most days. Diagnostic visits are scheduled within 1-2 business days.
Does Canyon Falls water affect acid wash?
Canyon Falls is on municipal water (typically Upper Trinity Water District or DCUD), which is relatively clean — TDS under 500 ppm — but summer irrigation demand and Texas heat still push chemistry around. For acid wash that's mostly good news — the failures we see in Canyon Falls are heat-cycle and chemistry-drift related rather than mineral, so they're more predictable and cheaper to stay ahead of. Many Canyon Falls pools run salt chlorine generators, which changes how we dose the other chemicals.
Do you charge for the diagnostic visit even if I don't book the repair?
Yes — there's a flat diagnostic charge that we quote on the call before we send a tech. We waive it if you book the repair on the same visit. The diagnostic includes a written estimate so you can compare or get a second opinion before any work starts. We don't publish a fixed repair price online because every job is genuinely different — but you'll never get a surprise number.
Are you licensed and insured for pool work in Canyon Falls?
Yes — we carry full general liability + workers' comp, and our techs are trained on every major brand (Pentair, Hayward, Jandy, Sta-Rite). We're a real local business in Argyle serving Canyon Falls (76226), not a referral marketplace that sells your details to whoever answers first.
Do you bring parts on the first visit, or do I wait for a second visit for the repair?
We stock the most-common parts on every truck — pump seals, basket lids, cartridges, sand, filter o-rings, ignition components, salt-cell test kits. About 70% of repairs in Canyon Falls finish on the first visit. The other 30% need a part order; we book the return for the next available slot, usually within 48 hours.
How often can a plaster pool be acid washed?
Most traditional white plaster finishes can handle an acid wash every 5 to 7 years. Each treatment removes roughly 1 to 2 millimeters of surface paste, so excessive washing exposes the rough sand and aggregate beneath. Pebble and quartz finishes tolerate the process better because the aggregate itself is impervious to acid.
Will an acid wash fix rough spots or plaster cracks?
No. Acid removes mineral scale and stains, but it does not repair structural cracks or smooth out degraded, pitted plaster. In fact, if the plaster is already thin, an acid wash can make rough patches more noticeable by removing the surrounding smooth cream coat.
What happens to the acid after scrubbing the walls?
The acid collects in the deep end bowl where we neutralize it using soda ash until the pH reaches a neutral 7.0 to 7.4. Once safe and inert, the slurry is pumped out according to local municipal drainage regulations so it does not damage storm drains or pool pumps.
Can I leave the pool empty after the wash to save on water bills?
No. In North Texas clay soils, an empty concrete pool risks floating or shifting from hydrostatic ground pressure, and direct summer sun will crack bare plaster. Refilling begins immediately once the neutralization and rinse-down are finished.

Canyon Falls acid wash — call (469) 455-1054

Family-owned in Argyle. Real techs, real same-day service when we have parts on the truck.

Free checklist

The DFW month-by-month pool checklist

What it covers (12 months · 76 tasks · 12 marked critical):

  • Freeze nights (January and December): keep the pump running, and what to drain if the power goes out
  • The March opening: test everything, brush, shock, then balance alkalinity, pH and calcium
  • Summer: testing two or three times a week, the weekly shock, and what to do after rain or a party
  • Fall leaves, and easing the chemistry down for winter
Read it now — no email needed →

Email me the checklist

One email with a link to the printable checklist — print it, or save it as a PDF, from that page. That is all we send: no mailing list.

Retail Store

Visit Us Today

Stop by for free water testing, expert advice, and professional-grade supplies.

Simplified Pools

1611 Commons Cir Suite 100, Northlake, TX 76226
Northlake, TX 76226

Get Directions →
Call Now
Book Service