Created to keep organic matter, oils, dirt, and minerals from building up in your spas  plumbing, Sirona Jet Blasters goal is to keep your plumbing clear and clean.

~ Helps you avoid buildup in your plumbing that restricts water flow and any possible damage to your equipment.

~ Compatible with all sanitizers, including Chlorine, Biguanide , Bromine, and Ozone.

~ Before draining your spa and or hot tub, add your Sirona Jet Blaster solution for a cleansed and polished spa.

Directions: Hot tubs and spas

1. Remove filter and clean separately with our Sirona Filter Cleaner.

2. Before draining your hot tub/ Spa, add one pint (16 oz) of your Sirona Jet Blaster into the warm spa water.

3. Turn ON your pump, making sure that your filter is no longer inside. Run your pump and jets for about 15 minutes.

4. Turn not only your jets but your pump OFF as well, and let sit for an hour.

5. Turn pump ON, run jets and blowers for roughly 15 minutes.

6. Drain your spa, hose down the interior of your spa while it drains.

7. Once completed, refill your spa with new, clean water.

8. Enjoy!

~ If your spa produces quite a bit of foam, have no fear, just fill your spa halfway and drain again while hosing down your spas walls.

~ If your spa/ hot tub continues to produce a large amount of foam try Sirona Foam Out.

Directions: Jetted Bath Tubs

 1. Before draining your bath tub, add half a bottle of your Sirona Jet Blaster (8 oz) to your water.

2. Turn your jets ON for 15 minutes to clean out any unnecessary buildup.

3. Once completed drain your tub while simultaneously rinsing your tub with clean water.