Your cart

Your cart is empty

Regal Pool Stabilizer this product is formulated to increase the stabilizer level in your pool water. It effectively helps in reducing chlorine loss due to the sun's ultraviolet rays. When used according to the directions, it dissolves completely, ensuring efficient and effective treatment.

~ Raises stabilizer in your pool.

~ Dissolves quickly and completely.

~ Reduces chlorine loss caused by harmful ultraviolet rays.

~ Prolong the effective life of your chlorine.

Dosage:

~ Add 1lb per 3,000 gallons of pool water to provide an initial stabilizer level of 40 ppm. 

~ Add 1lb per 4,000 gallons of pool water to provide an initial stabilizer level of 30 ppm.

Directions:

1.  Before adding, backwash or clean the filter before adding this product to the pool. Maintain a pH of between 7.2-7.6.

2. Broadcast directly into the pool, scattering over the surface of the water.

3. Use a pool brush to brush any undissolved product off the pool surface.

4. For pools with plastic piping, this product may be slowly added through the skimmer. 

5. Keep the water circulating continuously for 24 hours after application. 

6. When the product reaches the filter, there may be a temporary increase in filter pressure which will dissipate as the product dissolves.

~ DO NOT backwash the filter for 24 hours after the application of the stabilizer.

Active Ingredients:

~ Cyarunic Acid: 100%.

REGAL CHEMICALS 8lbs. Pool Stabilizer

SKU: RGL-50-2108
Regular price $56.89
Unit price
per 

Have questions? Contact us 469-455-1054

Regal Pool Stabilizer this product is formulated to increase the stabilizer level in your pool water. It effectively helps in reducing chlorine loss due to the sun's ultraviolet rays. When used according to the directions, it dissolves completely, ensuring efficient and effective treatment.

~ Raises stabilizer in your pool.

~ Dissolves quickly and completely.

~ Reduces chlorine loss caused by harmful ultraviolet rays.

~ Prolong the effective life of your chlorine.

Dosage:

~ Add 1lb per 3,000 gallons of pool water to provide an initial stabilizer level of 40 ppm. 

~ Add 1lb per 4,000 gallons of pool water to provide an initial stabilizer level of 30 ppm.

Directions:

1.  Before adding, backwash or clean the filter before adding this product to the pool. Maintain a pH of between 7.2-7.6.

2. Broadcast directly into the pool, scattering over the surface of the water.

3. Use a pool brush to brush any undissolved product off the pool surface.

4. For pools with plastic piping, this product may be slowly added through the skimmer. 

5. Keep the water circulating continuously for 24 hours after application. 

6. When the product reaches the filter, there may be a temporary increase in filter pressure which will dissipate as the product dissolves.

~ DO NOT backwash the filter for 24 hours after the application of the stabilizer.

Active Ingredients:

~ Cyarunic Acid: 100%.